Kestrel 2DX

Update of "KIA"
Login

Many hyperlinks are disabled.
Use anonymous login to enable hyperlinks.

Overview

Artifact ID: 697816e970d6e02d1b8353fb07e93f0322213797
Page Name:KIA
Date: 2017-09-05 04:05:45
Original User: kc5tja
Mimetype:text/x-markdown
Content

Keyboard Interface Adapter (KIA)

The KIA provides a dedicated PS/2 input controller. It provides a 16-deep FIFO (of which up to 15 bytes can be queued at any given time).

Register Map

Byte Offset Name R/W Purpose
0 STAT R 8-bit status register
2 DATA R 8-bit data input port
2 POP W Strobe to pop the FIFO.

NOTE. Attempting to access the KIA registers with 16-bit or wider accesses will yield unpredictable results. Always use 8-bit loads when accessing the KIA core.

STAT Register

Bit Name Purpose
7-2 unassigned
1 QF 0 if the KIA input queue is not yet full; 1 if no further data can be accepted.
0 QE 0 if the KIA input queue is not empty; 1 if the queue is empty.

DATA Register

Bit Name Purpose
7-0 DATA The head of the PS/2 scancode FIFO.

NOTE. Multiple reads of this port will return the same byte value. Once a keyboard driver reads a byte from the FIFO, it must "pop the queue" by writing a value to POP.

POP Strobe

This write-only register ignores all 8 bits written to it. Its sole purpose is to pop the FIFO, thus revealing the next available byte, if any.