D 2012-12-02T23:09:19.040
L Notes
P 5a7b614347472a0d8d412a4ff80e1857af519f95
U jfk
W 1097
Original Contents of file notes.txt as contained in file "Pulse2Tone_2012_01_22.zip"<br>
(Hyperlinks added by JvK)
(The PDF-file only contains a picture, which is directly stored as JPG in this repository)
<pre>
main.c - source code
main.h - header file
<a href="../P2D/doc/tip/Schematic_v1-0.png">Schematic_v1-0.png</a> - adapter schematic
<a href="../P2D/doc/tip/phone_circuit.jpg">wd_we500c-d.pdf</a> - phone schematic
Source code compiled with AVR Studio v4.18 + WinAVR for attiny45, optimization -O1.
SUT_CKSEL fuse should be programmed for external 8 Mhz crystal oscillator.
The converter originally designed to be mounted/wired inside the phone.
It has to be connected in parallel to the phone line, but _after_ the hook switch, e.g. between terminals C and F/RR on the phone schematic.
Rotary dial (all 4 wires) has to be disconnected from the phone and wired to the adapter (see schematic).
<b>The adapter is polarity sensitive.</b>
Terminal C is just a solder pad, so I ended up using L2 instead (itÂ’s a nice screw terminal).
</pre>
<b>End of notes</b>
Z 5858cfe8ef3cfeb1dce35c5e4048d5dc