** be useful before or after a period of disconnected operation.
**
** On Win32 systems, the file is named "_fossil" and is located in
** %LOCALAPPDATA%, %APPDATA% or %HOMEPATH%.
**
** Available operations are:
**
**    ignore     Arguments are repositories that should be ignored
**               by subsequent list, pull, push, rebuild, and sync.
**
**    list | ls  Display the location of all repositories
**
**    pull       Run a "pull" operation on all repositories
**
**    push       Run a "push" on all repositories
**
**    rebuild    Rebuild on all repositories
**
**    sync       Run a "sync" on all repositories
**
** Respositories are automatically added to the set of known repositories
** when one of the following commands against the repository:
**   <a>clone</a>, <a>info</a>, <a>pull</a>, <a>push</a>, or <a>sync</a>
** Even previously ignored repositories are added back
** to the list of repositories by these commands.
*/
void all_cmd(void){
  int n;
  Stmt q;
  const char *zCmd;
  char *zSyscmd;
  char *zFossil;

    zCmd = "push -autourl -R";
  }else if( strncmp(zCmd, "pull", n)==0 ){
    zCmd = "pull -autourl -R";
  }else if( strncmp(zCmd, "rebuild", n)==0 ){
    zCmd = "rebuild";
  }else if( strncmp(zCmd, "sync", n)==0 ){
    zCmd = "sync -autourl -R";
  }else if( strncmp(zCmd, "ignore", n)==0 ){
    int j;
    db_begin_transaction();
    for(j=3; j<g.argc; j++){
      db_multi_exec("DELETE FROM global_config WHERE name GLOB 'repo:%q'",
         g.argv[j]);
    }
    db_end_transaction(0);
    return;
  }else{
    fossil_fatal("\"all\" subcommand should be one of: "
                 "ignore list ls push pull rebuild sync");
  }
  zFossil = quoteFilename(g.argv[0]);
  nMissing = 0;
  db_prepare(&q,
     "SELECT DISTINCT substr(name, 6) COLLATE nocase"
     "  FROM global_config"
     " WHERE substr(name, 1, 5)=='repo:' ORDER BY 1"

      printf("%s\n", zFilename);
      continue;
    }
    zQFilename = quoteFilename(zFilename);
    zSyscmd = mprintf("%s %s %s", zFossil, zCmd, zQFilename);
    printf("%s\n", zSyscmd);
    fflush(stdout);
    fossil_system(zSyscmd);
    free(zSyscmd);
    free(zQFilename);
  }
  
  /* If any repositories whose names appear in the ~/.fossil file could not
  ** be found, remove those names from the ~/.fossil file.
  */

                   g.zLocalRoot);
#if defined(_WIN32)
  blob_add_cr(&text);
#endif
  blob_write_to_file(&text, zFile);
  zCmd = mprintf("%s \"%s\"", zEditor, zFile);
  printf("%s\n", zCmd);
  if( fossil_system(zCmd) ){
    fossil_panic("editor aborted");
  }
  blob_reset(&text);
  blob_read_from_file(&text, zFile);
  blob_remove_cr(&text);
  unlink(zFile);
  free(zFile);

/*
** COMMAND: ci
** COMMAND: commit
**
** Usage: %fossil commit ?OPTIONS? ?FILE...?
**


** Create a new version containing all of the changes in the current
** checkout.  You will be prompted to enter a check-in comment unless
** the comment has been specified on the command-line using "-m" or a 
** file containing the comment using -M.  The editor defined in the
** "editor" fossil option (see %fossil <a>help</a> set) will be used, or from
** the "VISUAL" or "EDITOR" environment variables (in that order) if
** no editor is set.
**


** All files that have changed will be committed unless some subset of
** files is specified on the command line.
**
** The --branch option followed by a branch name causes the new check-in
** to be placed in the named branch. The --bgcolor option can be followed
** by a color name (ex:  '#ffc0c0') to specify the background color of
** entries in the new branch when shown in the web timeline interface.
**
** A check-in is not permitted to fork unless the --force or -f option
** appears.  A check-in is not allowed against a closed check-in.
**
** The --private option creates a private check-in that is never synced.
** Children of private check-ins are automatically private.
**
** Options:
**
**    --comment|-m COMMENT-TEXT
**    --message-file|-M COMMENT-FILE
**    --branch NEW-BRANCH-NAME
**    --bgcolor COLOR
**    --nosign
**    --force|-f
**    --private
**    --baseline
**    --delta

    ** calculated before the checkin started (and stored as the R record
    ** of the manifest file).
    */
    vfile_aggregate_checksum_repository(nvid, &cksum2);
    if( blob_compare(&cksum1, &cksum2) ){
      fossil_panic("tree checksum does not match repository after commit");
    }
  
    /* Verify that the manifest checksum matches the expected checksum */
    vfile_aggregate_checksum_manifest(nvid, &cksum2, &cksum1b);
    if( blob_compare(&cksum1, &cksum1b) ){
      fossil_panic("manifest checksum does not agree with manifest: "
                   "%b versus %b", &cksum1, &cksum1b);
    }
    if( blob_compare(&cksum1, &cksum2) ){
      fossil_panic("tree checksum does not match manifest after commit: "
                   "%b versus %b", &cksum1, &cksum2);
    }
  
    /* Verify that the commit did not modify any disk images. */
    vfile_aggregate_checksum_disk(nvid, &cksum2);
    if( blob_compare(&cksum1, &cksum2) ){
      fossil_panic("tree checksums before and after commit do not match");
    }
  }

    return 0;
  }
  zRand = db_text(0, "SELECT hex(randomblob(10))");
  zOut = mprintf("out-%s", zRand);
  zIn = mprintf("in-%z", zRand);
  blob_write_to_file(pIn, zOut);
  zCmd = mprintf("%s %s %s", zBase, zIn, zOut);
  rc = fossil_system(zCmd);
  free(zCmd);
  if( rc==0 ){
    if( pOut==pIn ){
      blob_reset(pIn);
    }
    blob_zero(pOut);
    blob_read_from_file(pOut, zIn);

  { "dont-push",     0,                0, "off"                 },
  { "editor",        0,               16, ""                    },
  { "gdiff-command", 0,               16, "gdiff"               },
  { "ignore-glob",   0,               40, ""                    },
  { "http-port",     0,               16, "8080"                },
  { "localauth",     0,                0, "off"                 },
  { "manifest",      0,                0, "off"                 },
  { "mtime-changes", 0,                0, "on"                  },
  { "pgp-command",   0,               32, "gpg --clearsign -o " },
  { "proxy",         0,               32, "off"                 },









  { "repo-cksum",    0,                0, "on"                  },
  { "ssh-command",   0,               32, ""                    },
  { "web-browser",   0,               32, ""                    },
  { 0,0,0,0 }
};

/*

**                  The default is "gpg --clearsign -o ".
**
**    proxy         URL of the HTTP proxy.  If undefined or "off" then
**                  the "http_proxy" environment variable is consulted.
**                  If the http_proxy environment variable is undefined
**                  then a direct HTTP connection is used.
**

































**    repo-cksum    Compute checksums over all files in each checkout
**                  as a double-check of correctness.  Defaults to "on".
**                  Disable on large repositories for a performance
**                  improvement.
**
**    ssh-command   Command used to talk to a remote machine with
**                  the "ssh://" protocol.

/*
** Diff option flags
*/
#define DIFF_NEWFILE  0x01    /* Treat non-existing fails as empty files */
#define DIFF_NOEOLWS  0x02    /* Ignore whitespace at the end of lines */






















/*
** Show the difference between two files, one in memory and one on disk.
**
** The difference is the set of edits needed to transform pFile1 into
** zFile2.  The content of pFile1 is in memory.  zFile2 exists on disk.
**
** Use the internal diff logic if zDiffCmd is NULL.  Otherwise call the

    blob_zero(&cmd);
    blob_appendf(&cmd, "%s ", zDiffCmd);
    shell_escape(&cmd, blob_str(&nameFile1));
    blob_append(&cmd, " ", 1);
    shell_escape(&cmd, zFile2);

    /* Run the external diff command */
    fossil_system(blob_str(&cmd));

    /* Delete the temporary file and clean up memory used */
    unlink(blob_str(&nameFile1));
    blob_reset(&nameFile1);
    blob_reset(&cmd);
  }
}

    blob_zero(&cmd);
    blob_appendf(&cmd, "%s ", zDiffCmd);
    shell_escape(&cmd, zTemp1);
    blob_append(&cmd, " ", 1);
    shell_escape(&cmd, zTemp2);

    /* Run the external diff command */
    fossil_system(blob_str(&cmd));

    /* Delete the temporary file and clean up memory used */
    unlink(zTemp1);
    unlink(zTemp2);
    blob_reset(&cmd);
  }
}

** the <a>setting</a> command. If no external diff program is configured, then
** the "-i" option is a no-op.  The "-i" option converts "gdiff" into
** "diff".
**
** The results of the internal diff command can also be seen in the gui:
**  1. Go to the <a href="vdiff">vdiff</a> page
**  2. use the "diff against another version" link on the Check-in detail view.
**
** The "-N" or "--new-file" option causes the complete text of added or
** deleted files to be displayed.
*/
void diff_cmd(void){
  int isGDiff;               /* True for gdiff.  False for normal diff */
  int isInternDiff;          /* True for internal diff */
  int hasNFlag;              /* True if -N or --new-file flag is used */
  const char *zFrom;         /* Source version number */
  const char *zTo;           /* Target version number */

    { "spl",        3, "application/x-futuresplash"        },
    { "src",        3, "application/x-wais-source"         },
    { "step",       4, "application/STEP"                  },
    { "stl",        3, "application/SLA"                   },
    { "stp",        3, "application/STEP"                  },
    { "sv4cpio",    7, "application/x-sv4cpio"             },
    { "sv4crc",     6, "application/x-sv4crc"              },
    { "svg",        3, "image/svg+xml"                     },
    { "swf",        3, "application/x-shockwave-flash"     },
    { "t",          1, "application/x-troff"               },
    { "tar",        3, "application/x-tar"                 },
    { "tcl",        3, "application/x-tcl"                 },
    { "tex",        3, "application/x-tex"                 },
    { "texi",       4, "application/x-texinfo"             },
    { "texinfo",    7, "application/x-texinfo"             },

** Also test Fossil's ability to measure attributes of a file.
*/
void cmd_test_canonical_name(void){
  int i;
  Blob x;
  blob_zero(&x);
  for(i=2; i<g.argc; i++){
    char zBuf[100];
    const char *zName = g.argv[i];
    file_canonical_name(zName, &x);
    printf("%s\n", blob_buffer(&x));
    blob_reset(&x);
    sqlite3_snprintf(sizeof(zBuf), zBuf, "%lld", file_size(zName));
    printf("  file_size   = %s\n", zBuf);
    sqlite3_snprintf(sizeof(zBuf), zBuf, "%lld", file_mtime(zName));
    printf("  file_mtime  = %s\n", zBuf);
    printf("  file_isfile = %d\n", file_isfile(zName));
    printf("  file_isexe  = %d\n", file_isexe(zName));
    printf("  file_isdir  = %d\n", file_isdir(zName));
  }
}

/*

** false, then simply return 0.
**
** The root of the tree is defined by the g.zLocalRoot variable.
*/
int file_tree_name(const char *zOrigName, Blob *pOut, int errFatal){
  int n;
  Blob full;
  int nFull;
  char *zFull;

  blob_zero(pOut);
  db_must_be_within_tree();
  file_canonical_name(zOrigName, &full);
  n = strlen(g.zLocalRoot);
  assert( n>0 && g.zLocalRoot[n-1]=='/' );
  nFull = blob_size(&full);
  zFull = blob_buffer(&full);

  /* Special case.  zOrigName refers to g.zLocalRoot directory. */
  if( nFull==n-1 && memcmp(g.zLocalRoot, zFull, nFull)==0 ){
    blob_append(pOut, ".", 1);
    return 1;
  }

  if( nFull<=n || memcmp(g.zLocalRoot, zFull, n) ){
    blob_reset(&full);
    if( errFatal ){
      fossil_fatal("file outside of checkout tree: %s", zOrigName);
    }
    return 0;
  }

  blob_append(pOut, &zFull[n], nFull-n);
  return 1;
}

/*
** COMMAND:  test-tree-name
**
** Test the operation of the tree name generator.

*/
#include "config.h"
#include "finfo.h"

/*
** COMMAND: finfo
** 
** Usage: %fossil finfo {?-l|--log? / -s|--status / --p|--print} FILENAME
**
** Print the complete change history for a single file going backwards
** in time.  The default is -l.
**
** For the -l|--log option: If "-b|--brief" is specified one line per revision
** is printed, otherwise the full comment is printed.  The "--limit N"
** and "--offset P" options limits the output to the first N changes
** after skipping P changes.
**
** In the -s form prints the status as <status> <revision>.  This is
** a quick status and does not check for up-to-date-ness of the file.
**
** The -p form, there's an optional flag "-r|--revision REVISION".  The
** specified version (or the latest checked out version) is printed to
** stdout.
**
** The history of a file can also be viewed in the gui:
**  * Go to the <a href="dir">file browser</a> and drill down to the file
*/
void finfo_cmd(void){

  int vid;






  db_must_be_within_tree();
  vid = db_lget_int("checkout", 0);
  if( vid==0 ){
    fossil_panic("no checkout to finfo files in");
  }
  vfile_check_signature(vid, 1);
  if (find_option("status","s",0)) {
    Stmt q;

    Blob line;
    Blob fname;


    if( g.argc!=3 ) usage("-s|--status FILENAME");
    file_tree_name(g.argv[2], &fname, 1);
    db_prepare(&q,
        "SELECT pathname, deleted, rid, chnged, coalesce(origname!=pathname,0)"
        "  FROM vfile WHERE vfile.pathname=%B", &fname);
    blob_zero(&line);
    if ( db_step(&q)==SQLITE_ROW ) {
      Blob uuid;
      int isDeleted = db_column_int(&q, 1);
      int isNew = db_column_int(&q,2) == 0;
      int chnged = db_column_int(&q,3);
      int renamed = db_column_int(&q,4);

      blob_zero(&uuid);
      db_blob(&uuid,
           "SELECT uuid FROM blob, mlink, vfile WHERE "
           "blob.rid = mlink.mid AND mlink.fid = vfile.rid AND "
           "vfile.pathname=%B",
           &fname
      );
      if( isNew ){
        blob_appendf(&line, "new");
      }else if( isDeleted ){
        blob_appendf(&line, "deleted");
      }else if( renamed ){
        blob_appendf(&line, "renamed");
      }else if( chnged ){
        blob_appendf(&line, "edited");
      }else{
        blob_appendf(&line, "unchanged");
      }
      blob_appendf(&line, " ");
      blob_appendf(&line, " %10.10s", blob_str(&uuid));
      blob_reset(&uuid);
    }else{
      blob_appendf(&line, "unknown 0000000000");
    }
    db_finalize(&q);
    printf("%s\n", blob_str(&line));
    blob_reset(&fname);
    blob_reset(&line);
  }else if( find_option("print","p",0) ){
    Blob record;
    Blob fname;
    const char *zRevision = find_option("revision", "r", 1);
 



    file_tree_name(g.argv[2], &fname, 1);
    if( zRevision ){
      historical_version_of_file(zRevision, blob_str(&fname), &record, 0);
    }else{
      int rid = db_int(0, "SELECT rid FROM vfile WHERE pathname=%B", &fname);
      if( rid==0 ){

        fossil_fatal("no history for file: %b", &fname);
      }
      content_get(rid, &record);
    }
    blob_write_to_file(&record, "-");
    blob_reset(&record);
    blob_reset(&fname);
  }else{
    Blob line;
    Stmt q;
    Blob fname;
    int rid;
    const char *zFilename;
    const char *zLimit;
    const char *zOffset;
    int iLimit, iOffset, iBrief;

    if( find_option("log","l",0) ){
      /* this is the default, no-op */
    }
    zLimit = find_option("limit",0,1);
    iLimit = zLimit ? atoi(zLimit) : -1;
    zOffset = find_option("offset",0,1);
    iOffset = zOffset ? atoi(zOffset) : 0;
    iBrief = (find_option("brief","b",0) == 0);
    if( g.argc!=3 ){
      usage("?-l|--log? ?-b|--brief? FILENAME");
    }
    file_tree_name(g.argv[2], &fname, 1);
    rid = db_int(0, "SELECT rid FROM vfile WHERE pathname=%B", &fname);
    if( rid==0 ){
      fossil_fatal("no history for file: %b", &fname);
    }
    zFilename = blob_str(&fname);
    db_prepare(&q,
        "SELECT b.uuid, ci.uuid, date(event.mtime,'localtime'),"
        "       coalesce(event.ecomment, event.comment),"
        "       coalesce(event.euser, event.user)"
        "  FROM mlink, blob b, event, blob ci"
        " WHERE mlink.fnid=(SELECT fnid FROM filename WHERE name=%Q)"
        "   AND b.rid=mlink.fid"
        "   AND event.objid=mlink.mid"
        "   AND event.objid=ci.rid"
        " ORDER BY event.mtime DESC LIMIT %d OFFSET %d",
        zFilename, iLimit, iOffset
    );
    blob_zero(&line);
    if( iBrief ){
      printf("History of %s\n", blob_str(&fname));
    }
    while( db_step(&q)==SQLITE_ROW ){
      const char *zFileUuid = db_column_text(&q, 0);
      const char *zCiUuid = db_column_text(&q,1);
      const char *zDate = db_column_text(&q, 2);
      const char *zCom = db_column_text(&q, 3);
      const char *zUser = db_column_text(&q, 4);
      char *zOut;
      if( iBrief ){
        printf("%s ", zDate);




        zOut = sqlite3_mprintf("[%.10s] %s (user: %s, artifact: [%.10s])",
                               zCiUuid, zCom, zUser, zFileUuid);

        comment_print(zOut, 11, 79);
        sqlite3_free(zOut);
      }else{
        blob_reset(&line);
        blob_appendf(&line, "%.10s ", zCiUuid);
        blob_appendf(&line, "%.10s ", zDate);
        blob_appendf(&line, "%8.8s ", zUser);
        blob_appendf(&line,"%-40.40s\n", zCom );
        comment_print(blob_str(&line), 0, 79);
      }
    }
    db_finalize(&q);
    blob_reset(&fname);
  }
}


/*
** WEBPAGE: finfo
** URL: /finfo?name=FILENAME
**

  blob_zero(pHdr);
  i = strlen(g.urlPath);
  if( i>0 && g.urlPath[i-1]=='/' ){
    zSep = "";
  }else{
    zSep = "/";
  }
  blob_appendf(pHdr, "POST %s%sxfer/xfer HTTP/1.0\r\n", g.urlPath, zSep);
  if( g.urlProxyAuth ){
    blob_appendf(pHdr, "Proxy-Authorization: %s\n", g.urlProxyAuth);
  }
  blob_appendf(pHdr, "Host: %s\r\n", g.urlHostname);
  blob_appendf(pHdr, "User-Agent: Fossil/" MANIFEST_VERSION "\r\n");
  if( g.fHttpTrace ){
    blob_appendf(pHdr, "Content-Type: application/x-fossil-debug\r\n");

        closeConnection = 0;
      }
    }else if( rc==302 && strncasecmp(zLine, "location:", 9)==0 ){
      int i, j;
      for(i=9; zLine[i] && zLine[i]==' '; i++){}
      if( zLine[i]==0 ) fossil_fatal("malformed redirect: %s", zLine);
      j = strlen(zLine) - 1; 
      while( j>4 && strcmp(&zLine[j-4],"/xfer")==0 ){
         j -= 4;
         zLine[j] = 0;
      }
      fossil_print("redirect to %s\n", &zLine[i]);
      url_parse(&zLine[i]);
      transport_close();
      http_exchange(pSend, pReply, useLogin);
      return;
    }else if( strncasecmp(zLine, "content-type: text/html", 23)==0 ){
      isError = 1;

    fprintf(sshOut, "\n\n");
  }else if( g.urlIsFile ){
    char *zCmd;
    fclose(transport.pFile);
    zCmd = mprintf("\"%s\" http \"%s\" \"%s\" \"%s\" 127.0.0.1",
       g.argv[0], g.urlName, transport.zOutFile, transport.zInFile
    );
    fossil_system(zCmd);
    free(zCmd);
    transport.pFile = fopen(transport.zInFile, "rb");
  }
}

/*
** This routine is called when the inbound message has been received

/*
** Return the name of the login cookie
*/
static char *login_cookie_name(void){
  static char *zCookieName = 0;
  if( zCookieName==0 ){
    unsigned int h = 0;
    const char *z = g.zBaseURL;
    while( *z ){ h = (h<<3) ^ (h>>26) ^ *(z++); }
    zCookieName = mprintf("fossil_login_%08x", h);

  }
  return zCookieName;
}

/*
** Redirect to the page specified by the "g" query parameter.
** Or if there is no "g" query parameter, redirect to the homepage.

/*
** This procedure runs first.
*/
int main(int argc, char **argv){
  const char *zCmdName = "unknown";
  int idx;
  int rc;
  int mightBeCgi;

  sqlite3_config(SQLITE_CONFIG_LOG, fossil_sqlite_log, 0);
  g.now = time(0);
  g.argc = argc;
  g.argv = argv;
  mightBeCgi = getenv("GATEWAY_INTERFACE")!=0;
  if( argc<2 ){
    if( mightBeCgi ){
      zCmdName = "cgi";
    }else{
      fprintf(stderr, "Usage: %s COMMAND ...\n"
                      "\"%s help\" for a list of available commands\n"
                      "\"%s help COMMAND\" for specific details\n",
                      argv[0], argv[0], argv[0]);
      fossil_exit(1);
    }
  }else{
    g.fQuiet = find_option("quiet", 0, 0)!=0;
    g.fSqlTrace = find_option("sqltrace", 0, 0)!=0;
    g.fSqlPrint = find_option("sqlprint", 0, 0)!=0;
    g.fHttpTrace = find_option("httptrace", 0, 0)!=0;
    g.zLogin = find_option("user", "U", 1);
    zCmdName = argv[1];
  }
  rc = name_search(zCmdName, aCommand, count(aCommand), &idx);
  if( rc==1 && mightBeCgi ){
    rc = name_search("cgi", aCommand, count(aCommand), &idx);
  }
  if( rc==1 ){
    fprintf(stderr,"%s: unknown command: %s\n"
                   "%s: use \"help\" for more information\n",
                   argv[0], zCmdName, argv[0]);
    fossil_exit(1);
  }else if( rc==2 ){
    fprintf(stderr,"%s: ambiguous command prefix: %s\n"

  free(p);
}
void *fossil_realloc(void *p, size_t n){
  p = realloc(p, n);
  if( p==0 ) fossil_panic("out of memory");
  return p;
}

/*
** This function implements a cross-platform "system()" interface.
*/
int fossil_system(const char *zOrigCmd){
  int rc;
#if defined(_WIN32)
  /* On windows, we have to put double-quotes around the entire command.
  ** Who knows why - this is just the way windows works.
  */
  char *zNewCmd = mprintf("\"%s\"", zOrigCmd);
  rc = system(zNewCmd);
  free(zNewCmd);
#else
  /* On unix, evaluate the command directly.
  */
  rc = system(zOrigCmd);
#endif 
  return rc; 
}



/*
** Return a name for an SQLite error code
*/
static const char *sqlite_error_code_name(int iCode){
  static char zCode[30];

}

/*
** WEBPAGE: help
** URL: /help?cmd=CMD
*/
void help_page(void){
  const char * zCmd = P("cmd");
  
  style_header("Command line help %s%s",zCmd?" - ":"",zCmd?zCmd:"");
  if( zCmd  && zCmd[0] && strcmp(zCmd,"test") ){
    int rc, idx;

    rc = name_search(zCmd, aCommand, count(aCommand), &idx);
    if( rc==1 ){
      @ <h1>unknown command: %s(zCmd)</h1>
    }else if( rc==2 ){
      @ <h1>ambiguous command prefix: %s(zCmd)</h1>
    }else{
      const char *zHelp;
      int i;

      zHelp = aCmdHelp[idx];
      @ <h1>%s(aCommand[idx].zName)</h1>

      if( zHelp==0 || zHelp[0]==0 ){
        @ no help available for the %s(aCommand[idx].zName) command
      }else{

        int c;
        @ <div class="cmdhelp">
        for(i=0; (c = zHelp[i])!=0; i++){
          if( c=='%' && memcmp(zHelp+i, "%fossil", 7)==0 ){
            /* Skip over the "%" */
            cgi_append_content(zHelp, i);
            i++;
            zHelp += i;

            i = 0;



          }else if( c=='<' && memcmp(zHelp+i, "</a>", 3)==0 ){
            cgi_append_content(zHelp, i+4);
            zHelp += i+4;










            i = -1;
            cgi_append_content("\"", 1);
          }else if( c=='<' && memcmp(zHelp+i, "<a ", 3)==0 ){
            cgi_append_content(zHelp, i);


            cgi_append_content("\"", 1);
            zHelp += i;
            i = 0;
          }else if( c=='<' && strncmp(zHelp+i, "<a>", 3)==0 ){
            /* found an internal command cross reference,
            ** create an additional link

            */
            cgi_append_content(zHelp, i);
            cgi_append_content("\"<a href=\"help?cmd=", -1);
            zHelp += i+3;








            i = 0;
            while( zHelp[i] && memcmp(zHelp+i,"</a>",4)!=0 ){


              i++;



            }
            cgi_append_content(zHelp, i);
            cgi_append_content("\">", -1);
            cgi_append_content(zHelp, i);
            cgi_append_content("</a>\"", -1);
            zHelp += i+4;
            i = -1;
          }
        }

        cgi_append_content(zHelp, i);
        @ </div>




      }
    }
    @ see also the list of
    @ <a href="help">available commands</a> in fossil
    @ version %s(MANIFEST_VERSION" "MANIFEST_DATE) UTC
  }else{
    int nCol, nRow, i, ignored, cnt, showTest;
    
    /* detect, if we show normal or test commands */
    showTest = ( zCmd  && !strncmp(zCmd,"test",4) );
    for( i=0,ignored=0; i<count(aCommand); i++){
      if( (strncmp(aCommand[i].zName,"test",4)==0) ^ showTest ) ignored++;
    }
    nCol = 4;
    nRow = (count(aCommand)-ignored+nCol-1)/nCol;
    @ <h1>Available commands</h1>
    @ <table class="browser"><tr><td class="browser"><ul class="browser">
    for( i=cnt=0; i<count(aCommand); i++ ){
      if( cnt==nRow ){
        @ </ul></td><td class="browser"><ul class="browser">
        cnt=0;
      }
      if( (strncmp(aCommand[i].zName,"test",4)==0) ^ showTest ) continue;
      @ <li><kbd><a href="help?cmd=%s(aCommand[i].zName)">
      @ %s(aCommand[i].zName)</a></kbd></li>
      cnt++;
    }
    @ </ul></td></tr></table>
    if( showTest ){
      @ <a href="help">show standard commands</a>
    }else{
      @ <a class="hidden" href="help?cmd=test">show test commands</a>
    }

  }
  style_footer();
}

/*
** Set the g.zBaseURL value to the full URL for the toplevel of
** the fossil tree.  Set g.zTop to g.zBaseURL without the
** leading "http://" and the host and port.
*/

    zBrowser = db_get("web-browser", "start");
    zBrowserCmd = mprintf("%s http://127.0.0.1:%%d/", zBrowser);
  }
  db_close();
  win32_http_server(iPort, mxPort, zBrowserCmd, zStopperFile, zNotFound, flags);
#endif
}

/*
** COMMAND: sqlite3
**
** Usage: %fossil sqlite3 ?DATABASE? ?OPTIONS?
**
** Run the standalone sqlite3 command-line shell on DATABASE with OPTIONS.
** If DATABASE is omitted, then the repository that serves the working
** directory is opened.
**
** WARNING:  Careless use of this command can corrupt a Fossil repository
** in ways that are unrecoverable.  Be sure you know what you are doing before
** running any SQL commands that modifies the repository database.
*/
void sqlite3_cmd(void){
  extern int sqlite3_shell(int, char**);
  sqlite3_shell(g.argc-1, g.argv+1);
}

/*
** This routine is called by the patched sqlite3 command-line shell in order
** to load the name and database connection for the open Fossil database.
*/
void fossil_open(sqlite3 **pDb, const char **pzRepoName){
  db_must_be_within_tree();
  *pDb = 0;
  *pzRepoName = g.zRepositoryName;
}

	$(TCLSH) test/tester.tcl $(APPNAME)

VERSION.h:	$(SRCDIR)/../manifest.uuid $(SRCDIR)/../manifest
	awk '{ printf "#define MANIFEST_UUID \"%s\"\n", $$1}'  $(SRCDIR)/../manifest.uuid >VERSION.h
	awk '{ printf "#define MANIFEST_VERSION \"[%.10s]\"\n", $$1}'  $(SRCDIR)/../manifest.uuid >>VERSION.h
	awk '$$1=="D"{printf "#define MANIFEST_DATE \"%s %s\"\n", substr($$2,1,10),substr($$2,12)}'  $(SRCDIR)/../manifest >>VERSION.h

EXTRAOBJ =  $(OBJDIR)/sqlite3.o  $(OBJDIR)/shell.o  $(OBJDIR)/th.o  $(OBJDIR)/th_lang.o

$(APPNAME):	headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

# This rule prevents make from using its default rules to try build
# an executable named "manifest" out of the file named "manifest.c"
#
$(SRCDIR)/../manifest:	
	# noop

$(OBJDIR)/zip.o:	zip_.c zip.h  $(SRCDIR)/config.h
	$(XTCC) -o $(OBJDIR)/zip.o -c zip_.c

zip.h:	headers
$(OBJDIR)/sqlite3.o:	$(SRCDIR)/sqlite3.c
	$(XTCC) -DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0 -c $(SRCDIR)/sqlite3.c -o $(OBJDIR)/sqlite3.o

$(OBJDIR)/shell.o:	$(SRCDIR)/shell.c
	$(XTCC) -Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1 -c $(SRCDIR)/shell.c -o $(OBJDIR)/shell.o

$(OBJDIR)/th.o:	$(SRCDIR)/th.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th.c -o $(OBJDIR)/th.o

$(OBJDIR)/th_lang.o:	$(SRCDIR)/th_lang.c
	$(XTCC) -I$(SRCDIR) -c $(SRCDIR)/th_lang.c -o $(OBJDIR)/th_lang.o

		$(SRCDIR)/../manifest.uuid >VERSION.h
	awk '{ printf "#define MANIFEST_VERSION \"[%.10s]\"\n", $$1}' \
		$(SRCDIR)/../manifest.uuid >>VERSION.h
	awk '$$1=="D"{printf "#define MANIFEST_DATE \"%s %s\"\n",\
		substr($$2,1,10),substr($$2,12)}' \
		$(SRCDIR)/../manifest >>VERSION.h

EXTRAOBJ = \
  $(OBJDIR)/sqlite3.o \
  $(OBJDIR)/shell.o \
  $(OBJDIR)/th.o \
  $(OBJDIR)/th_lang.o

$(APPNAME):	headers $(OBJ) $(EXTRAOBJ)
	$(TCC) -o $(APPNAME) $(OBJ) $(EXTRAOBJ) $(LIB)

# This rule prevents make from using its default rules to try build
# an executable named "manifest" out of the file named "manifest.c"
#
$(SRCDIR)/../manifest:	
	# noop

set opt {-DSQLITE_OMIT_LOAD_EXTENSION=1}
append opt " -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4"
#append opt " -DSQLITE_ENABLE_FTS3=1"
append opt " -Dlocaltime=fossil_localtime"
append opt " -DSQLITE_ENABLE_LOCKING_STYLE=0"
puts "\t\$(XTCC) $opt -c \$(SRCDIR)/sqlite3.c -o \$(OBJDIR)/sqlite3.o\n"

puts "\$(OBJDIR)/shell.o:\t\$(SRCDIR)/shell.c"
set opt {-Dmain=sqlite3_shell}
append opt " -DSQLITE_OMIT_LOAD_EXTENSION=1"
puts "\t\$(XTCC) $opt -c \$(SRCDIR)/shell.c -o \$(OBJDIR)/shell.o\n"

puts "\$(OBJDIR)/th.o:\t\$(SRCDIR)/th.c"
puts "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th.c -o \$(OBJDIR)/th.o\n"

puts "\$(OBJDIR)/th_lang.o:\t\$(SRCDIR)/th_lang.c"
puts "\t\$(XTCC) -I\$(SRCDIR) -c \$(SRCDIR)/th_lang.c -o \$(OBJDIR)/th_lang.o\n"
exit
}

  puts -nonewline "${s}_.c "
}
puts "\n"
puts -nonewline "OBJ   = "
foreach s [lsort $src] {
  puts -nonewline "\$(OBJDIR)\\$s\$O "
}
puts "\$(OBJDIR)\\shell\$O \$(OBJDIR)\\sqlite3\$O \$(OBJDIR)\\th\$O \$(OBJDIR)\\th_lang\$O "
puts {
RC=$(DMDIR)\bin\rcc
RCFLAGS=-32 -w1 -I$(SRCDIR) /D__DMC__

APPNAME = $(OBJDIR)\fossil$(E)

all: $(APPNAME)

$(APPNAME) : translate$E mkindex$E headers fossil.res $(OBJ) $(OBJDIR)\link
	cd $(OBJDIR) 
	$(DMDIR)\bin\link @link

fossil.res:	$B\win\fossil.rc VERSION.h
	$(RC) $(RCFLAGS) -o$@ $B\win\fossil.rc

$(OBJDIR)\link: $B\win\Makefile.dmc}
puts -nonewline "\t+echo "
foreach s [lsort $src] {
  puts -nonewline "$s "
}
puts "shell sqlite3 th th_lang > \$@"
puts "\t+echo fossil >> \$@"
puts "\t+echo fossil >> \$@"
puts "\t+echo \$(LIBS) >> \$@"
puts "\t+echo. >> \$@"
puts "\t+echo fossil >> \$@\n\n"

puts {
translate$E: $(SRCDIR)\translate.c
	$(BCC) -o$@ $**

makeheaders$E: $(SRCDIR)\makeheaders.c
	$(BCC) -o$@ $**

mkindex$E: $(SRCDIR)\mkindex.c
	$(BCC) -o$@ $**

version$E: $B\win\version.c
	$(BCC) -o$@ $**

$(OBJDIR)\shell$O : $(SRCDIR)\shell.c
	$(TCC) -o$@ -c -Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1 $**

$(OBJDIR)\sqlite3$O : $(SRCDIR)\sqlite3.c
	$(TCC) -o$@ -c -DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0 $**

$(OBJDIR)\th$O : $(SRCDIR)\th.c
	$(TCC) -o$@ -c $**

$(OBJDIR)\th_lang$O : $(SRCDIR)\th_lang.c

clean:
	-del $(OBJDIR)\*.obj
	-del *.obj *_.c *.h *.map

realclean:
	-del $(APPNAME) translate$E mkindex$E makeheaders$E version$E
	-del fossil.res headers link

}
foreach s [lsort $src] {
  puts "\$(OBJDIR)\\$s\$O : ${s}_.c ${s}.h"
  puts "\t\$(TCC) -o\$@ -c ${s}_.c\n"
  puts "${s}_.c : \$(SRCDIR)\\$s.c"
  puts "\t+translate\$E \$** > \$@\n"

  if( vid==0 ){
    fossil_fatal("nothing is checked out");
  }
  mid = name_to_rid(g.argv[2]);
  if( mid==0 ){
    fossil_fatal("not a version: %s", g.argv[2]);
  }
  if( !is_a_version(mid) ){
    fossil_fatal("not a version: %s", g.argv[2]);
  }
  if( pickFlag || backoutFlag ){
    pid = db_int(0, "SELECT pid FROM plink WHERE cid=%d AND isprim", mid);
    if( pid<=0 ){
      fossil_fatal("cannot find an ancestor for %s", g.argv[2]);
    }

    db_prepare(&q, "SELECT merge FROM vmerge WHERE id=0");
    while( db_step(&q)==SQLITE_ROW ){
      pivot_set_secondary(db_column_int(&q,0));
    }
    db_finalize(&q);
    pid = pivot_find();
    if( pid<=0 ){
      fossil_fatal("cannot find a common ancestor between the current "
                   "checkout and %s", g.argv[2]);
    }
  }
  if( !is_a_version(pid) ){
    fossil_fatal("not a version: record #%d", pid);
  }
  vfile_check_signature(vid, 1);
  db_begin_transaction();
  undo_begin();
  load_vfile_from_rid(mid);
  load_vfile_from_rid(pid);

    "DELETE FROM aqueue;"
    "CREATE INDEX IF NOT EXISTS aqueue_idx1 ON aqueue(pending, mtime);"
  );

  /* Insert the primary record */
  db_multi_exec( 
    "INSERT INTO aqueue(rid, mtime, pending, src)"
    "  SELECT %d, mtime, 1, 1 FROM event WHERE objid=%d AND type='ci' LIMIT 1",
    rid, rid
  );
}

/*
** Set a secondary file.  The primary file must be set first.  There
** must be at least one secondary but there can be more than one if
** desired.
*/
void pivot_set_secondary(int rid){
  /* Insert the primary record */
  db_multi_exec( 
    "INSERT OR IGNORE INTO aqueue(rid, mtime, pending, src)"
    "  SELECT %d, mtime, 1, 0 FROM event WHERE objid=%d AND type='ci'",
    rid, rid
  );
}

/*
** Find the most recent common ancestor of the primary and one of
** the secondaries.  Return its rid.  Return 0 if no common ancestor

** Called after each artifact is processed
*/
static void rebuild_step_done(rid){
  /* assert( bag_find(&bagDone, rid)==0 ); */
  bag_insert(&bagDone, rid);
  if( ttyOutput ){
    processCnt++;
    if (!g.fQuiet && totalSize>0) {
      percent_complete((processCnt*1000)/totalSize);
    }
  }
}

/*
** Rebuild cross-referencing information for the artifact

      db_multi_exec("INSERT OR IGNORE INTO phantom VALUES(%d)", rid);
      rebuild_step_done(rid);
    }
  }
  db_finalize(&s);
  manifest_crosslink_end();
  rebuild_tag_trunk();
  if( !g.fQuiet && totalSize>0 ){
    processCnt += incrSize;
    percent_complete((processCnt*1000)/totalSize);
  }
  create_cluster();
  if( !g.fQuiet && totalSize>0 ){
    processCnt += incrSize;
    percent_complete((processCnt*1000)/totalSize);
  }
  if(!g.fQuiet && ttyOutput ){
    printf("\n");
  }
  return errCnt;

** records.  Run this command after updating the fossil
** executable in a way that changes the database schema.
*/
void rebuild_database(void){
  int forceFlag;
  int randomizeFlag;
  int errCnt;
  int omitVerify;

  omitVerify = find_option("noverify",0,0)!=0;
  forceFlag = find_option("force","f",0)!=0;
  randomizeFlag = find_option("randomize", 0, 0)!=0;
  if( g.argc==3 ){
    db_open_repository(g.argv[2]);
  }else{
    db_find_and_open_repository(1);
    if( g.argc!=2 ){
      usage("?REPOSITORY-FILENAME?");
    }
    db_close();
    db_open_repository(g.zRepositoryName);
  }
  db_begin_transaction();
  ttyOutput = 1;
  errCnt = rebuild_db(randomizeFlag, 1);
  if( errCnt && !forceFlag ){
    printf("%d errors. Rolling back changes. Use --force to force a commit.\n",
            errCnt);
    db_end_transaction(1);
  }else{
    if( omitVerify ) verify_cancel();
    db_end_transaction(0);
  }
}

/*
** COMMAND:  test-detach
**

      usage("?REPOSITORY-FILENAME?");
    }
    db_close();
    db_open_repository(g.zRepositoryName);
  }
  db_begin_transaction();
  create_cluster();
  db_end_transaction(0);  
}

/*
** COMMAND: scrub
** %fossil scrub [--verily] [--force] [REPOSITORY]
**
** The command removes sensitive information (such as passwords) from a

      iVal = iQ;
    }
  }
  if( iVal ){
    @ <input type="checkbox" name="%s(zQParm)" checked="checked" />
    @ <b>%s(zLabel)</b>
  }else{
    @ <input type="checkbox" name="%s(zQParm)" /> <b>%s(zLabel)</b>
  }
}

/*
** Generate an entry box for an attribute.
*/
void entry_attribute(

  @ <form action="%s(g.zBaseURL)/setup_settings" method="post"><div>
  @ <table border="0"><tr><td valign="top">
  login_insert_csrf_secret();
  for(pSet=ctrlSettings; pSet->name!=0; pSet++){
    if( pSet->width==0 ){
      onoff_attribute(pSet->name, pSet->name,
                      pSet->var!=0 ? pSet->var : pSet->name,
                      is_truth(pSet->def));
      @ <br />
    }
  }
  @ </td><td style="width: 30;"></td><td valign="top">
  for(pSet=ctrlSettings; pSet->name!=0; pSet++){
    if( pSet->width!=0 ){
      entry_attribute(pSet->name, /*pSet->width*/ 40, pSet->name,

  db_end_transaction(0);
}

/*
** WEBPAGE: setup_logo
*/
void setup_logo(void){
  const char *zMime = db_get("logo-mimetype","image/gif");
  const char *aImg = P("im");
  int szImg = atoi(PD("im:bytes","0"));
  if( szImg>0 ){
    zMime = PD("im:mimetype","image/gif");
  }
  login_check_credentials();
  if( !g.okSetup ){

/*
** 2001 September 15
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This file contains code to implement the "sqlite" command line
** utility for accessing SQLite databases.
*/
#if defined(_WIN32) || defined(WIN32)
/* This needs to come before any includes for MSVC compiler */
#define _CRT_SECURE_NO_WARNINGS
#endif

#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <assert.h>
#include "sqlite3.h"
#include <ctype.h>
#include <stdarg.h>

#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__)
# include <signal.h>
# if !defined(__RTP__) && !defined(_WRS_KERNEL)
#  include <pwd.h>
# endif
# include <unistd.h>
# include <sys/types.h>
#endif

#ifdef __OS2__
# include <unistd.h>
#endif

#if defined(HAVE_READLINE) && HAVE_READLINE==1
# include <readline/readline.h>
# include <readline/history.h>
#else
# define readline(p) local_getline(p,stdin)
# define add_history(X)
# define read_history(X)
# define write_history(X)
# define stifle_history(X)
#endif

#if defined(_WIN32) || defined(WIN32)
# include <io.h>
#define isatty(h) _isatty(h)
#define access(f,m) _access((f),(m))
#else
/* Make sure isatty() has a prototype.
*/
extern int isatty();
#endif

#if defined(_WIN32_WCE)
/* Windows CE (arm-wince-mingw32ce-gcc) does not provide isatty()
 * thus we always assume that we have a console. That can be
 * overridden with the -batch command line option.
 */
#define isatty(x) 1
#endif

#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(__RTP__) && !defined(_WRS_KERNEL)
#include <sys/time.h>
#include <sys/resource.h>

/* Saved resource information for the beginning of an operation */
static struct rusage sBegin;

/* True if the timer is enabled */
static int enableTimer = 0;

/*
** Begin timing an operation
*/
static void beginTimer(void){
  if( enableTimer ){
    getrusage(RUSAGE_SELF, &sBegin);
  }
}

/* Return the difference of two time_structs in seconds */
static double timeDiff(struct timeval *pStart, struct timeval *pEnd){
  return (pEnd->tv_usec - pStart->tv_usec)*0.000001 + 
         (double)(pEnd->tv_sec - pStart->tv_sec);
}

/*
** Print the timing results.
*/
static void endTimer(void){
  if( enableTimer ){
    struct rusage sEnd;
    getrusage(RUSAGE_SELF, &sEnd);
    printf("CPU Time: user %f sys %f\n",
       timeDiff(&sBegin.ru_utime, &sEnd.ru_utime),
       timeDiff(&sBegin.ru_stime, &sEnd.ru_stime));
  }
}

#define BEGIN_TIMER beginTimer()
#define END_TIMER endTimer()
#define HAS_TIMER 1

#elif (defined(_WIN32) || defined(WIN32))

#include <windows.h>

/* Saved resource information for the beginning of an operation */
static HANDLE hProcess;
static FILETIME ftKernelBegin;
static FILETIME ftUserBegin;
typedef BOOL (WINAPI *GETPROCTIMES)(HANDLE, LPFILETIME, LPFILETIME, LPFILETIME, LPFILETIME);
static GETPROCTIMES getProcessTimesAddr = NULL;

/* True if the timer is enabled */
static int enableTimer = 0;

/*
** Check to see if we have timer support.  Return 1 if necessary
** support found (or found previously).
*/
static int hasTimer(void){
  if( getProcessTimesAddr ){
    return 1;
  } else {
    /* GetProcessTimes() isn't supported in WIN95 and some other Windows versions.
    ** See if the version we are running on has it, and if it does, save off
    ** a pointer to it and the current process handle.
    */
    hProcess = GetCurrentProcess();
    if( hProcess ){
      HINSTANCE hinstLib = LoadLibrary(TEXT("Kernel32.dll"));
      if( NULL != hinstLib ){
        getProcessTimesAddr = (GETPROCTIMES) GetProcAddress(hinstLib, "GetProcessTimes");
        if( NULL != getProcessTimesAddr ){
          return 1;
        }
        FreeLibrary(hinstLib); 
      }
    }
  }
  return 0;
}

/*
** Begin timing an operation
*/
static void beginTimer(void){
  if( enableTimer && getProcessTimesAddr ){
    FILETIME ftCreation, ftExit;
    getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelBegin, &ftUserBegin);
  }
}

/* Return the difference of two FILETIME structs in seconds */
static double timeDiff(FILETIME *pStart, FILETIME *pEnd){
  sqlite_int64 i64Start = *((sqlite_int64 *) pStart);
  sqlite_int64 i64End = *((sqlite_int64 *) pEnd);
  return (double) ((i64End - i64Start) / 10000000.0);
}

/*
** Print the timing results.
*/
static void endTimer(void){
  if( enableTimer && getProcessTimesAddr){
    FILETIME ftCreation, ftExit, ftKernelEnd, ftUserEnd;
    getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelEnd, &ftUserEnd);
    printf("CPU Time: user %f sys %f\n",
       timeDiff(&ftUserBegin, &ftUserEnd),
       timeDiff(&ftKernelBegin, &ftKernelEnd));
  }
}

#define BEGIN_TIMER beginTimer()
#define END_TIMER endTimer()
#define HAS_TIMER hasTimer()

#else
#define BEGIN_TIMER 
#define END_TIMER
#define HAS_TIMER 0
#endif

/*
** Used to prevent warnings about unused parameters
*/
#define UNUSED_PARAMETER(x) (void)(x)

/*
** If the following flag is set, then command execution stops
** at an error if we are not interactive.
*/
static int bail_on_error = 0;

/*
** Threat stdin as an interactive input if the following variable
** is true.  Otherwise, assume stdin is connected to a file or pipe.
*/
static int stdin_is_interactive = 1;

/*
** The following is the open SQLite database.  We make a pointer
** to this database a static variable so that it can be accessed
** by the SIGINT handler to interrupt database processing.
*/
static sqlite3 *db = 0;

/*
** True if an interrupt (Control-C) has been received.
*/
static volatile int seenInterrupt = 0;

/*
** This is the name of our program. It is set in main(), used
** in a number of other places, mostly for error messages.
*/
static char *Argv0;

/*
** Prompt strings. Initialized in main. Settable with
**   .prompt main continue
*/
static char mainPrompt[20];     /* First line prompt. default: "sqlite> "*/
static char continuePrompt[20]; /* Continuation prompt. default: "   ...> " */

/*
** Write I/O traces to the following stream.
*/
#ifdef SQLITE_ENABLE_IOTRACE
static FILE *iotrace = 0;
#endif

/*
** This routine works like printf in that its first argument is a
** format string and subsequent arguments are values to be substituted
** in place of % fields.  The result of formatting this string
** is written to iotrace.
*/
#ifdef SQLITE_ENABLE_IOTRACE
static void iotracePrintf(const char *zFormat, ...){
  va_list ap;
  char *z;
  if( iotrace==0 ) return;
  va_start(ap, zFormat);
  z = sqlite3_vmprintf(zFormat, ap);
  va_end(ap);
  fprintf(iotrace, "%s", z);
  sqlite3_free(z);
}
#endif


/*
** Determines if a string is a number of not.
*/
static int isNumber(const char *z, int *realnum){
  if( *z=='-' || *z=='+' ) z++;
  if( !isdigit(*z) ){
    return 0;
  }
  z++;
  if( realnum ) *realnum = 0;
  while( isdigit(*z) ){ z++; }
  if( *z=='.' ){
    z++;
    if( !isdigit(*z) ) return 0;
    while( isdigit(*z) ){ z++; }
    if( realnum ) *realnum = 1;
  }
  if( *z=='e' || *z=='E' ){
    z++;
    if( *z=='+' || *z=='-' ) z++;
    if( !isdigit(*z) ) return 0;
    while( isdigit(*z) ){ z++; }
    if( realnum ) *realnum = 1;
  }
  return *z==0;
}

/*
** A global char* and an SQL function to access its current value 
** from within an SQL statement. This program used to use the 
** sqlite_exec_printf() API to substitue a string into an SQL statement.
** The correct way to do this with sqlite3 is to use the bind API, but
** since the shell is built around the callback paradigm it would be a lot
** of work. Instead just use this hack, which is quite harmless.
*/
static const char *zShellStatic = 0;
static void shellstaticFunc(
  sqlite3_context *context,
  int argc,
  sqlite3_value **argv
){
  assert( 0==argc );
  assert( zShellStatic );
  UNUSED_PARAMETER(argc);
  UNUSED_PARAMETER(argv);
  sqlite3_result_text(context, zShellStatic, -1, SQLITE_STATIC);
}


/*
** This routine reads a line of text from FILE in, stores
** the text in memory obtained from malloc() and returns a pointer
** to the text.  NULL is returned at end of file, or if malloc()
** fails.
**
** The interface is like "readline" but no command-line editing
** is done.
*/
static char *local_getline(char *zPrompt, FILE *in){
  char *zLine;
  int nLine;
  int n;
  int eol;

  if( zPrompt && *zPrompt ){
    printf("%s",zPrompt);
    fflush(stdout);
  }
  nLine = 100;
  zLine = malloc( nLine );
  if( zLine==0 ) return 0;
  n = 0;
  eol = 0;
  while( !eol ){
    if( n+100>nLine ){
      nLine = nLine*2 + 100;
      zLine = realloc(zLine, nLine);
      if( zLine==0 ) return 0;
    }
    if( fgets(&zLine[n], nLine - n, in)==0 ){
      if( n==0 ){
        free(zLine);
        return 0;
      }
      zLine[n] = 0;
      eol = 1;
      break;
    }
    while( zLine[n] ){ n++; }
    if( n>0 && zLine[n-1]=='\n' ){
      n--;
      if( n>0 && zLine[n-1]=='\r' ) n--;
      zLine[n] = 0;
      eol = 1;
    }
  }
  zLine = realloc( zLine, n+1 );
  return zLine;
}

/*
** Retrieve a single line of input text.
**
** zPrior is a string of prior text retrieved.  If not the empty
** string, then issue a continuation prompt.
*/
static char *one_input_line(const char *zPrior, FILE *in){
  char *zPrompt;
  char *zResult;
  if( in!=0 ){
    return local_getline(0, in);
  }
  if( zPrior && zPrior[0] ){
    zPrompt = continuePrompt;
  }else{
    zPrompt = mainPrompt;
  }
  zResult = readline(zPrompt);
#if defined(HAVE_READLINE) && HAVE_READLINE==1
  if( zResult && *zResult ) add_history(zResult);
#endif
  return zResult;
}

struct previous_mode_data {
  int valid;        /* Is there legit data in here? */
  int mode;
  int showHeader;
  int colWidth[100];
};

/*
** An pointer to an instance of this structure is passed from
** the main program to the callback.  This is used to communicate
** state and mode information.
*/
struct callback_data {
  sqlite3 *db;           /* The database */
  int echoOn;            /* True to echo input commands */
  int statsOn;           /* True to display memory stats before each finalize */
  int cnt;               /* Number of records displayed so far */
  FILE *out;             /* Write results here */
  int mode;              /* An output mode setting */
  int writableSchema;    /* True if PRAGMA writable_schema=ON */
  int showHeader;        /* True to show column names in List or Column mode */
  char *zDestTable;      /* Name of destination table when MODE_Insert */
  char separator[20];    /* Separator character for MODE_List */
  int colWidth[100];     /* Requested width of each column when in column mode*/
  int actualWidth[100];  /* Actual width of each column */
  char nullvalue[20];    /* The text to print when a NULL comes back from
                         ** the database */
  struct previous_mode_data explainPrev;
                         /* Holds the mode information just before
                         ** .explain ON */
  char outfile[FILENAME_MAX]; /* Filename for *out */
  const char *zDbFilename;    /* name of the database file */
  sqlite3_stmt *pStmt;   /* Current statement if any. */
  FILE *pLog;            /* Write log output here */
};

/*
** These are the allowed modes.
*/
#define MODE_Line     0  /* One column per line.  Blank line between records */
#define MODE_Column   1  /* One record per line in neat columns */
#define MODE_List     2  /* One record per line with a separator */
#define MODE_Semi     3  /* Same as MODE_List but append ";" to each line */
#define MODE_Html     4  /* Generate an XHTML table */
#define MODE_Insert   5  /* Generate SQL "insert" statements */
#define MODE_Tcl      6  /* Generate ANSI-C or TCL quoted elements */
#define MODE_Csv      7  /* Quote strings, numbers are plain */
#define MODE_Explain  8  /* Like MODE_Column, but do not truncate data */

static const char *modeDescr[] = {
  "line",
  "column",
  "list",
  "semi",
  "html",
  "insert",
  "tcl",
  "csv",
  "explain",
};

/*
** Number of elements in an array
*/
#define ArraySize(X)  (int)(sizeof(X)/sizeof(X[0]))

/*
** Compute a string length that is limited to what can be stored in
** lower 30 bits of a 32-bit signed integer.
*/
static int strlen30(const char *z){
  const char *z2 = z;
  while( *z2 ){ z2++; }
  return 0x3fffffff & (int)(z2 - z);
}

/*
** A callback for the sqlite3_log() interface.
*/
static void shellLog(void *pArg, int iErrCode, const char *zMsg){
  struct callback_data *p = (struct callback_data*)pArg;
  if( p->pLog==0 ) return;
  fprintf(p->pLog, "(%d) %s\n", iErrCode, zMsg);
  fflush(p->pLog);
}

/*
** Output the given string as a hex-encoded blob (eg. X'1234' )
*/
static void output_hex_blob(FILE *out, const void *pBlob, int nBlob){
  int i;
  char *zBlob = (char *)pBlob;
  fprintf(out,"X'");
  for(i=0; i<nBlob; i++){ fprintf(out,"%02x",zBlob[i]); }
  fprintf(out,"'");
}

/*
** Output the given string as a quoted string using SQL quoting conventions.
*/
static void output_quoted_string(FILE *out, const char *z){
  int i;
  int nSingle = 0;
  for(i=0; z[i]; i++){
    if( z[i]=='\'' ) nSingle++;
  }
  if( nSingle==0 ){
    fprintf(out,"'%s'",z);
  }else{
    fprintf(out,"'");
    while( *z ){
      for(i=0; z[i] && z[i]!='\''; i++){}
      if( i==0 ){
        fprintf(out,"''");
        z++;
      }else if( z[i]=='\'' ){
        fprintf(out,"%.*s''",i,z);
        z += i+1;
      }else{
        fprintf(out,"%s",z);
        break;
      }
    }
    fprintf(out,"'");
  }
}

/*
** Output the given string as a quoted according to C or TCL quoting rules.
*/
static void output_c_string(FILE *out, const char *z){
  unsigned int c;
  fputc('"', out);
  while( (c = *(z++))!=0 ){
    if( c=='\\' ){
      fputc(c, out);
      fputc(c, out);
    }else if( c=='\t' ){
      fputc('\\', out);
      fputc('t', out);
    }else if( c=='\n' ){
      fputc('\\', out);
      fputc('n', out);
    }else if( c=='\r' ){
      fputc('\\', out);
      fputc('r', out);
    }else if( !isprint(c) ){
      fprintf(out, "\\%03o", c&0xff);
    }else{
      fputc(c, out);
    }
  }
  fputc('"', out);
}

/*
** Output the given string with characters that are special to
** HTML escaped.
*/
static void output_html_string(FILE *out, const char *z){
  int i;
  while( *z ){
    for(i=0;   z[i] 
            && z[i]!='<' 
            && z[i]!='&' 
            && z[i]!='>' 
            && z[i]!='\"' 
            && z[i]!='\'';
        i++){}
    if( i>0 ){
      fprintf(out,"%.*s",i,z);
    }
    if( z[i]=='<' ){
      fprintf(out,"&lt;");
    }else if( z[i]=='&' ){
      fprintf(out,"&amp;");
    }else if( z[i]=='>' ){
      fprintf(out,"&gt;");
    }else if( z[i]=='\"' ){
      fprintf(out,"&quot;");
    }else if( z[i]=='\'' ){
      fprintf(out,"&#39;");
    }else{
      break;
    }
    z += i + 1;
  }
}

/*
** If a field contains any character identified by a 1 in the following
** array, then the string must be quoted for CSV.
*/
static const char needCsvQuote[] = {
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 0, 1, 0, 0, 0, 0, 1,   0, 0, 0, 0, 0, 0, 0, 0, 
  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 1, 
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
};

/*
** Output a single term of CSV.  Actually, p->separator is used for
** the separator, which may or may not be a comma.  p->nullvalue is
** the null value.  Strings are quoted using ANSI-C rules.  Numbers
** appear outside of quotes.
*/
static void output_csv(struct callback_data *p, const char *z, int bSep){
  FILE *out = p->out;
  if( z==0 ){
    fprintf(out,"%s",p->nullvalue);
  }else{
    int i;
    int nSep = strlen30(p->separator);
    for(i=0; z[i]; i++){
      if( needCsvQuote[((unsigned char*)z)[i]] 
         || (z[i]==p->separator[0] && 
             (nSep==1 || memcmp(z, p->separator, nSep)==0)) ){
        i = 0;
        break;
      }
    }
    if( i==0 ){
      putc('"', out);
      for(i=0; z[i]; i++){
        if( z[i]=='"' ) putc('"', out);
        putc(z[i], out);
      }
      putc('"', out);
    }else{
      fprintf(out, "%s", z);
    }
  }
  if( bSep ){
    fprintf(p->out, "%s", p->separator);
  }
}

#ifdef SIGINT
/*
** This routine runs when the user presses Ctrl-C
*/
static void interrupt_handler(int NotUsed){
  UNUSED_PARAMETER(NotUsed);
  seenInterrupt = 1;
  if( db ) sqlite3_interrupt(db);
}
#endif

/*
** This is the callback routine that the shell
** invokes for each row of a query result.
*/
static int shell_callback(void *pArg, int nArg, char **azArg, char **azCol, int *aiType){
  int i;
  struct callback_data *p = (struct callback_data*)pArg;

  switch( p->mode ){
    case MODE_Line: {
      int w = 5;
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        int len = strlen30(azCol[i] ? azCol[i] : "");
        if( len>w ) w = len;
      }
      if( p->cnt++>0 ) fprintf(p->out,"\n");
      for(i=0; i<nArg; i++){
        fprintf(p->out,"%*s = %s\n", w, azCol[i],
                azArg[i] ? azArg[i] : p->nullvalue);
      }
      break;
    }
    case MODE_Explain:
    case MODE_Column: {
      if( p->cnt++==0 ){
        for(i=0; i<nArg; i++){
          int w, n;
          if( i<ArraySize(p->colWidth) ){
            w = p->colWidth[i];
          }else{
            w = 0;
          }
          if( w<=0 ){
            w = strlen30(azCol[i] ? azCol[i] : "");
            if( w<10 ) w = 10;
            n = strlen30(azArg && azArg[i] ? azArg[i] : p->nullvalue);
            if( w<n ) w = n;
          }
          if( i<ArraySize(p->actualWidth) ){
            p->actualWidth[i] = w;
          }
          if( p->showHeader ){
            fprintf(p->out,"%-*.*s%s",w,w,azCol[i], i==nArg-1 ? "\n": "  ");
          }
        }
        if( p->showHeader ){
          for(i=0; i<nArg; i++){
            int w;
            if( i<ArraySize(p->actualWidth) ){
               w = p->actualWidth[i];
            }else{
               w = 10;
            }
            fprintf(p->out,"%-*.*s%s",w,w,"-----------------------------------"
                   "----------------------------------------------------------",
                    i==nArg-1 ? "\n": "  ");
          }
        }
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        int w;
        if( i<ArraySize(p->actualWidth) ){
           w = p->actualWidth[i];
        }else{
           w = 10;
        }
        if( p->mode==MODE_Explain && azArg[i] && 
           strlen30(azArg[i])>w ){
          w = strlen30(azArg[i]);
        }
        fprintf(p->out,"%-*.*s%s",w,w,
            azArg[i] ? azArg[i] : p->nullvalue, i==nArg-1 ? "\n": "  ");
      }
      break;
    }
    case MODE_Semi:
    case MODE_List: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          fprintf(p->out,"%s%s",azCol[i], i==nArg-1 ? "\n" : p->separator);
        }
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        char *z = azArg[i];
        if( z==0 ) z = p->nullvalue;
        fprintf(p->out, "%s", z);
        if( i<nArg-1 ){
          fprintf(p->out, "%s", p->separator);
        }else if( p->mode==MODE_Semi ){
          fprintf(p->out, ";\n");
        }else{
          fprintf(p->out, "\n");
        }
      }
      break;
    }
    case MODE_Html: {
      if( p->cnt++==0 && p->showHeader ){
        fprintf(p->out,"<TR>");
        for(i=0; i<nArg; i++){
          fprintf(p->out,"<TH>");
          output_html_string(p->out, azCol[i]);
          fprintf(p->out,"</TH>\n");
        }
        fprintf(p->out,"</TR>\n");
      }
      if( azArg==0 ) break;
      fprintf(p->out,"<TR>");
      for(i=0; i<nArg; i++){
        fprintf(p->out,"<TD>");
        output_html_string(p->out, azArg[i] ? azArg[i] : p->nullvalue);
        fprintf(p->out,"</TD>\n");
      }
      fprintf(p->out,"</TR>\n");
      break;
    }
    case MODE_Tcl: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          output_c_string(p->out,azCol[i] ? azCol[i] : "");
          fprintf(p->out, "%s", p->separator);
        }
        fprintf(p->out,"\n");
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        output_c_string(p->out, azArg[i] ? azArg[i] : p->nullvalue);
        fprintf(p->out, "%s", p->separator);
      }
      fprintf(p->out,"\n");
      break;
    }
    case MODE_Csv: {
      if( p->cnt++==0 && p->showHeader ){
        for(i=0; i<nArg; i++){
          output_csv(p, azCol[i] ? azCol[i] : "", i<nArg-1);
        }
        fprintf(p->out,"\n");
      }
      if( azArg==0 ) break;
      for(i=0; i<nArg; i++){
        output_csv(p, azArg[i], i<nArg-1);
      }
      fprintf(p->out,"\n");
      break;
    }
    case MODE_Insert: {
      p->cnt++;
      if( azArg==0 ) break;
      fprintf(p->out,"INSERT INTO %s VALUES(",p->zDestTable);
      for(i=0; i<nArg; i++){
        char *zSep = i>0 ? ",": "";
        if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){
          fprintf(p->out,"%sNULL",zSep);
        }else if( aiType && aiType[i]==SQLITE_TEXT ){
          if( zSep[0] ) fprintf(p->out,"%s",zSep);
          output_quoted_string(p->out, azArg[i]);
        }else if( aiType && (aiType[i]==SQLITE_INTEGER || aiType[i]==SQLITE_FLOAT) ){
          fprintf(p->out,"%s%s",zSep, azArg[i]);
        }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){
          const void *pBlob = sqlite3_column_blob(p->pStmt, i);
          int nBlob = sqlite3_column_bytes(p->pStmt, i);
          if( zSep[0] ) fprintf(p->out,"%s",zSep);
          output_hex_blob(p->out, pBlob, nBlob);
        }else if( isNumber(azArg[i], 0) ){
          fprintf(p->out,"%s%s",zSep, azArg[i]);
        }else{
          if( zSep[0] ) fprintf(p->out,"%s",zSep);
          output_quoted_string(p->out, azArg[i]);
        }
      }
      fprintf(p->out,");\n");
      break;
    }
  }
  return 0;
}

/*
** This is the callback routine that the SQLite library
** invokes for each row of a query result.
*/
static int callback(void *pArg, int nArg, char **azArg, char **azCol){
  /* since we don't have type info, call the shell_callback with a NULL value */
  return shell_callback(pArg, nArg, azArg, azCol, NULL);
}

/*
** Set the destination table field of the callback_data structure to
** the name of the table given.  Escape any quote characters in the
** table name.
*/
static void set_table_name(struct callback_data *p, const char *zName){
  int i, n;
  int needQuote;
  char *z;

  if( p->zDestTable ){
    free(p->zDestTable);
    p->zDestTable = 0;
  }
  if( zName==0 ) return;
  needQuote = !isalpha((unsigned char)*zName) && *zName!='_';
  for(i=n=0; zName[i]; i++, n++){
    if( !isalnum((unsigned char)zName[i]) && zName[i]!='_' ){
      needQuote = 1;
      if( zName[i]=='\'' ) n++;
    }
  }
  if( needQuote ) n += 2;
  z = p->zDestTable = malloc( n+1 );
  if( z==0 ){
    fprintf(stderr,"Error: out of memory\n");
    exit(1);
  }
  n = 0;
  if( needQuote ) z[n++] = '\'';
  for(i=0; zName[i]; i++){
    z[n++] = zName[i];
    if( zName[i]=='\'' ) z[n++] = '\'';
  }
  if( needQuote ) z[n++] = '\'';
  z[n] = 0;
}

/* zIn is either a pointer to a NULL-terminated string in memory obtained
** from malloc(), or a NULL pointer. The string pointed to by zAppend is
** added to zIn, and the result returned in memory obtained from malloc().
** zIn, if it was not NULL, is freed.
**
** If the third argument, quote, is not '\0', then it is used as a 
** quote character for zAppend.
*/
static char *appendText(char *zIn, char const *zAppend, char quote){
  int len;
  int i;
  int nAppend = strlen30(zAppend);
  int nIn = (zIn?strlen30(zIn):0);

  len = nAppend+nIn+1;
  if( quote ){
    len += 2;
    for(i=0; i<nAppend; i++){
      if( zAppend[i]==quote ) len++;
    }
  }

  zIn = (char *)realloc(zIn, len);
  if( !zIn ){
    return 0;
  }

  if( quote ){
    char *zCsr = &zIn[nIn];
    *zCsr++ = quote;
    for(i=0; i<nAppend; i++){
      *zCsr++ = zAppend[i];
      if( zAppend[i]==quote ) *zCsr++ = quote;
    }
    *zCsr++ = quote;
    *zCsr++ = '\0';
    assert( (zCsr-zIn)==len );
  }else{
    memcpy(&zIn[nIn], zAppend, nAppend);
    zIn[len-1] = '\0';
  }

  return zIn;
}


/*
** Execute a query statement that has a single result column.  Print
** that result column on a line by itself with a semicolon terminator.
**
** This is used, for example, to show the schema of the database by
** querying the SQLITE_MASTER table.
*/
static int run_table_dump_query(
  FILE *out,              /* Send output here */
  sqlite3 *db,            /* Database to query */
  const char *zSelect,    /* SELECT statement to extract content */
  const char *zFirstRow   /* Print before first row, if not NULL */
){
  sqlite3_stmt *pSelect;
  int rc;
  rc = sqlite3_prepare(db, zSelect, -1, &pSelect, 0);
  if( rc!=SQLITE_OK || !pSelect ){
    return rc;
  }
  rc = sqlite3_step(pSelect);
  while( rc==SQLITE_ROW ){
    if( zFirstRow ){
      fprintf(out, "%s", zFirstRow);
      zFirstRow = 0;
    }
    fprintf(out, "%s;\n", sqlite3_column_text(pSelect, 0));
    rc = sqlite3_step(pSelect);
  }
  return sqlite3_finalize(pSelect);
}

/*
** Allocate space and save off current error string.
*/
static char *save_err_msg(
  sqlite3 *db            /* Database to query */
){
  int nErrMsg = 1+strlen30(sqlite3_errmsg(db));
  char *zErrMsg = sqlite3_malloc(nErrMsg);
  if( zErrMsg ){
    memcpy(zErrMsg, sqlite3_errmsg(db), nErrMsg);
  }
  return zErrMsg;
}

/*
** Display memory stats.
*/
static int display_stats(
  sqlite3 *db,                /* Database to query */
  struct callback_data *pArg, /* Pointer to struct callback_data */
  int bReset                  /* True to reset the stats */
){
  int iCur;
  int iHiwtr;

  if( pArg && pArg->out ){
    
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_MEMORY_USED, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Memory Used:                         %d (max %d) bytes\n", iCur, iHiwtr);
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_MALLOC_COUNT, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Number of Allocations:               %d (max %d)\n", iCur, iHiwtr);
/*
** Not currently used by the CLI.
**    iHiwtr = iCur = -1;
**    sqlite3_status(SQLITE_STATUS_PAGECACHE_USED, &iCur, &iHiwtr, bReset);
**    fprintf(pArg->out, "Number of Pcache Pages Used:         %d (max %d) pages\n", iCur, iHiwtr);
*/
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_PAGECACHE_OVERFLOW, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Number of Pcache Overflow Bytes:     %d (max %d) bytes\n", iCur, iHiwtr);
/*
** Not currently used by the CLI.
**    iHiwtr = iCur = -1;
**    sqlite3_status(SQLITE_STATUS_SCRATCH_USED, &iCur, &iHiwtr, bReset);
**    fprintf(pArg->out, "Number of Scratch Allocations Used:  %d (max %d)\n", iCur, iHiwtr);
*/
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_SCRATCH_OVERFLOW, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Number of Scratch Overflow Bytes:    %d (max %d) bytes\n", iCur, iHiwtr);
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_MALLOC_SIZE, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Largest Allocation:                  %d bytes\n", iHiwtr);
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_PAGECACHE_SIZE, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Largest Pcache Allocation:           %d bytes\n", iHiwtr);
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_SCRATCH_SIZE, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Largest Scratch Allocation:          %d bytes\n", iHiwtr);
#ifdef YYTRACKMAXSTACKDEPTH
    iHiwtr = iCur = -1;
    sqlite3_status(SQLITE_STATUS_PARSER_STACK, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Deepest Parser Stack:                %d (max %d)\n", iCur, iHiwtr);
#endif
  }

  if( pArg && pArg->out && db ){
    iHiwtr = iCur = -1;
    sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_USED, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Lookaside Slots Used:                %d (max %d)\n", iCur, iHiwtr);
    iHiwtr = iCur = -1;
    sqlite3_db_status(db, SQLITE_DBSTATUS_CACHE_USED, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Pager Heap Usage:                    %d bytes\n", iCur); 
    iHiwtr = iCur = -1;
    sqlite3_db_status(db, SQLITE_DBSTATUS_SCHEMA_USED, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Schema Heap Usage:                   %d bytes\n", iCur); 
    iHiwtr = iCur = -1;
    sqlite3_db_status(db, SQLITE_DBSTATUS_STMT_USED, &iCur, &iHiwtr, bReset);
    fprintf(pArg->out, "Statement Heap/Lookaside Usage:      %d bytes\n", iCur); 
  }

  if( pArg && pArg->out && db && pArg->pStmt ){
    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_FULLSCAN_STEP, bReset);
    fprintf(pArg->out, "Fullscan Steps:                      %d\n", iCur);
    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_SORT, bReset);
    fprintf(pArg->out, "Sort Operations:                     %d\n", iCur);
    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_AUTOINDEX, bReset);
    fprintf(pArg->out, "Autoindex Inserts:                   %d\n", iCur);
  }

  return 0;
}

/*
** Execute a statement or set of statements.  Print 
** any result rows/columns depending on the current mode 
** set via the supplied callback.
**
** This is very similar to SQLite's built-in sqlite3_exec() 
** function except it takes a slightly different callback 
** and callback data argument.
*/
static int shell_exec(
  sqlite3 *db,                                /* An open database */
  const char *zSql,                           /* SQL to be evaluated */
  int (*xCallback)(void*,int,char**,char**,int*),   /* Callback function */
                                              /* (not the same as sqlite3_exec) */
  struct callback_data *pArg,                 /* Pointer to struct callback_data */
  char **pzErrMsg                             /* Error msg written here */
){
  sqlite3_stmt *pStmt = NULL;     /* Statement to execute. */
  int rc = SQLITE_OK;             /* Return Code */
  const char *zLeftover;          /* Tail of unprocessed SQL */

  if( pzErrMsg ){
    *pzErrMsg = NULL;
  }

  while( zSql[0] && (SQLITE_OK == rc) ){
    rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, &zLeftover);
    if( SQLITE_OK != rc ){
      if( pzErrMsg ){
        *pzErrMsg = save_err_msg(db);
      }
    }else{
      if( !pStmt ){
        /* this happens for a comment or white-space */
        zSql = zLeftover;
        while( isspace(zSql[0]) ) zSql++;
        continue;
      }

      /* save off the prepared statment handle and reset row count */
      if( pArg ){
        pArg->pStmt = pStmt;
        pArg->cnt = 0;
      }

      /* echo the sql statement if echo on */
      if( pArg && pArg->echoOn ){
        const char *zStmtSql = sqlite3_sql(pStmt);
        fprintf(pArg->out, "%s\n", zStmtSql ? zStmtSql : zSql);
      }

      /* perform the first step.  this will tell us if we
      ** have a result set or not and how wide it is.
      */
      rc = sqlite3_step(pStmt);
      /* if we have a result set... */
      if( SQLITE_ROW == rc ){
        /* if we have a callback... */
        if( xCallback ){
          /* allocate space for col name ptr, value ptr, and type */
          int nCol = sqlite3_column_count(pStmt);
          void *pData = sqlite3_malloc(3*nCol*sizeof(const char*) + 1);
          if( !pData ){
            rc = SQLITE_NOMEM;
          }else{
            char **azCols = (char **)pData;      /* Names of result columns */
            char **azVals = &azCols[nCol];       /* Results */
            int *aiTypes = (int *)&azVals[nCol]; /* Result types */
            int i;
            assert(sizeof(int) <= sizeof(char *)); 
            /* save off ptrs to column names */
            for(i=0; i<nCol; i++){
              azCols[i] = (char *)sqlite3_column_name(pStmt, i);
            }
            do{
              /* extract the data and data types */
              for(i=0; i<nCol; i++){
                azVals[i] = (char *)sqlite3_column_text(pStmt, i);
                aiTypes[i] = sqlite3_column_type(pStmt, i);
                if( !azVals[i] && (aiTypes[i]!=SQLITE_NULL) ){
                  rc = SQLITE_NOMEM;
                  break; /* from for */
                }
              } /* end for */

              /* if data and types extracted successfully... */
              if( SQLITE_ROW == rc ){ 
                /* call the supplied callback with the result row data */
                if( xCallback(pArg, nCol, azVals, azCols, aiTypes) ){
                  rc = SQLITE_ABORT;
                }else{
                  rc = sqlite3_step(pStmt);
                }
              }
            } while( SQLITE_ROW == rc );
            sqlite3_free(pData);
          }
        }else{
          do{
            rc = sqlite3_step(pStmt);
          } while( rc == SQLITE_ROW );
        }
      }

      /* print usage stats if stats on */
      if( pArg && pArg->statsOn ){
        display_stats(db, pArg, 0);
      }

      /* Finalize the statement just executed. If this fails, save a 
      ** copy of the error message. Otherwise, set zSql to point to the
      ** next statement to execute. */
      rc = sqlite3_finalize(pStmt);
      if( rc==SQLITE_OK ){
        zSql = zLeftover;
        while( isspace(zSql[0]) ) zSql++;
      }else if( pzErrMsg ){
        *pzErrMsg = save_err_msg(db);
      }

      /* clear saved stmt handle */
      if( pArg ){
        pArg->pStmt = NULL;
      }
    }
  } /* end while */

  return rc;
}


/*
** This is a different callback routine used for dumping the database.
** Each row received by this callback consists of a table name,
** the table type ("index" or "table") and SQL to create the table.
** This routine should print text sufficient to recreate the table.
*/
static int dump_callback(void *pArg, int nArg, char **azArg, char **azCol){
  int rc;
  const char *zTable;
  const char *zType;
  const char *zSql;
  const char *zPrepStmt = 0;
  struct callback_data *p = (struct callback_data *)pArg;

  UNUSED_PARAMETER(azCol);
  if( nArg!=3 ) return 1;
  zTable = azArg[0];
  zType = azArg[1];
  zSql = azArg[2];
  
  if( strcmp(zTable, "sqlite_sequence")==0 ){
    zPrepStmt = "DELETE FROM sqlite_sequence;\n";
  }else if( strcmp(zTable, "sqlite_stat1")==0 ){
    fprintf(p->out, "ANALYZE sqlite_master;\n");
  }else if( strncmp(zTable, "sqlite_", 7)==0 ){
    return 0;
  }else if( strncmp(zSql, "CREATE VIRTUAL TABLE", 20)==0 ){
    char *zIns;
    if( !p->writableSchema ){
      fprintf(p->out, "PRAGMA writable_schema=ON;\n");
      p->writableSchema = 1;
    }
    zIns = sqlite3_mprintf(
       "INSERT INTO sqlite_master(type,name,tbl_name,rootpage,sql)"
       "VALUES('table','%q','%q',0,'%q');",
       zTable, zTable, zSql);
    fprintf(p->out, "%s\n", zIns);
    sqlite3_free(zIns);
    return 0;
  }else{
    fprintf(p->out, "%s;\n", zSql);
  }

  if( strcmp(zType, "table")==0 ){
    sqlite3_stmt *pTableInfo = 0;
    char *zSelect = 0;
    char *zTableInfo = 0;
    char *zTmp = 0;
    int nRow = 0;
   
    zTableInfo = appendText(zTableInfo, "PRAGMA table_info(", 0);
    zTableInfo = appendText(zTableInfo, zTable, '"');
    zTableInfo = appendText(zTableInfo, ");", 0);

    rc = sqlite3_prepare(p->db, zTableInfo, -1, &pTableInfo, 0);
    free(zTableInfo);
    if( rc!=SQLITE_OK || !pTableInfo ){
      return 1;
    }

    zSelect = appendText(zSelect, "SELECT 'INSERT INTO ' || ", 0);
    zTmp = appendText(zTmp, zTable, '"');
    if( zTmp ){
      zSelect = appendText(zSelect, zTmp, '\'');
    }
    zSelect = appendText(zSelect, " || ' VALUES(' || ", 0);
    rc = sqlite3_step(pTableInfo);
    while( rc==SQLITE_ROW ){
      const char *zText = (const char *)sqlite3_column_text(pTableInfo, 1);
      zSelect = appendText(zSelect, "quote(", 0);
      zSelect = appendText(zSelect, zText, '"');
      rc = sqlite3_step(pTableInfo);
      if( rc==SQLITE_ROW ){
        zSelect = appendText(zSelect, ") || ',' || ", 0);
      }else{
        zSelect = appendText(zSelect, ") ", 0);
      }
      nRow++;
    }
    rc = sqlite3_finalize(pTableInfo);
    if( rc!=SQLITE_OK || nRow==0 ){
      free(zSelect);
      return 1;
    }
    zSelect = appendText(zSelect, "|| ')' FROM  ", 0);
    zSelect = appendText(zSelect, zTable, '"');

    rc = run_table_dump_query(p->out, p->db, zSelect, zPrepStmt);
    if( rc==SQLITE_CORRUPT ){
      zSelect = appendText(zSelect, " ORDER BY rowid DESC", 0);
      rc = run_table_dump_query(p->out, p->db, zSelect, 0);
    }
    if( zSelect ) free(zSelect);
  }
  return 0;
}

/*
** Run zQuery.  Use dump_callback() as the callback routine so that
** the contents of the query are output as SQL statements.
**
** If we get a SQLITE_CORRUPT error, rerun the query after appending
** "ORDER BY rowid DESC" to the end.
*/
static int run_schema_dump_query(
  struct callback_data *p, 
  const char *zQuery,
  char **pzErrMsg
){
  int rc;
  rc = sqlite3_exec(p->db, zQuery, dump_callback, p, pzErrMsg);
  if( rc==SQLITE_CORRUPT ){
    char *zQ2;
    int len = strlen30(zQuery);
    if( pzErrMsg ) sqlite3_free(*pzErrMsg);
    zQ2 = malloc( len+100 );
    if( zQ2==0 ) return rc;
    sqlite3_snprintf(sizeof(zQ2), zQ2, "%s ORDER BY rowid DESC", zQuery);
    rc = sqlite3_exec(p->db, zQ2, dump_callback, p, pzErrMsg);
    free(zQ2);
  }
  return rc;
}

/*
** Text of a help message
*/
static char zHelp[] =
  ".backup ?DB? FILE      Backup DB (default \"main\") to FILE\n"
  ".bail ON|OFF           Stop after hitting an error.  Default OFF\n"
  ".databases             List names and files of attached databases\n"
  ".dump ?TABLE? ...      Dump the database in an SQL text format\n"
  "                         If TABLE specified, only dump tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".echo ON|OFF           Turn command echo on or off\n"
  ".exit                  Exit this program\n"
  ".explain ?ON|OFF?      Turn output mode suitable for EXPLAIN on or off.\n"
  "                         With no args, it turns EXPLAIN on.\n"
  ".header(s) ON|OFF      Turn display of headers on or off\n"
  ".help                  Show this message\n"
  ".import FILE TABLE     Import data from FILE into TABLE\n"
  ".indices ?TABLE?       Show names of all indices\n"
  "                         If TABLE specified, only show indices for tables\n"
  "                         matching LIKE pattern TABLE.\n"
#ifdef SQLITE_ENABLE_IOTRACE
  ".iotrace FILE          Enable I/O diagnostic logging to FILE\n"
#endif
#ifndef SQLITE_OMIT_LOAD_EXTENSION
  ".load FILE ?ENTRY?     Load an extension library\n"
#endif
  ".log FILE|off          Turn logging on or off.  FILE can be stderr/stdout\n"
  ".mode MODE ?TABLE?     Set output mode where MODE is one of:\n"
  "                         csv      Comma-separated values\n"
  "                         column   Left-aligned columns.  (See .width)\n"
  "                         html     HTML <table> code\n"
  "                         insert   SQL insert statements for TABLE\n"
  "                         line     One value per line\n"
  "                         list     Values delimited by .separator string\n"
  "                         tabs     Tab-separated values\n"
  "                         tcl      TCL list elements\n"
  ".nullvalue STRING      Print STRING in place of NULL values\n"
  ".output FILENAME       Send output to FILENAME\n"
  ".output stdout         Send output to the screen\n"
  ".prompt MAIN CONTINUE  Replace the standard prompts\n"
  ".quit                  Exit this program\n"
  ".read FILENAME         Execute SQL in FILENAME\n"
  ".restore ?DB? FILE     Restore content of DB (default \"main\") from FILE\n"
  ".schema ?TABLE?        Show the CREATE statements\n"
  "                         If TABLE specified, only show tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".separator STRING      Change separator used by output mode and .import\n"
  ".show                  Show the current values for various settings\n"
  ".stats ON|OFF          Turn stats on or off\n"
  ".tables ?TABLE?        List names of tables\n"
  "                         If TABLE specified, only list tables matching\n"
  "                         LIKE pattern TABLE.\n"
  ".timeout MS            Try opening locked tables for MS milliseconds\n"
  ".width NUM1 NUM2 ...   Set column widths for \"column\" mode\n"
;

static char zTimerHelp[] =
  ".timer ON|OFF          Turn the CPU timer measurement on or off\n"
;

/* Forward reference */
static int process_input(struct callback_data *p, FILE *in);

/*
** Make sure the database is open.  If it is not, then open it.  If
** the database fails to open, print an error message and exit.
*/
static void open_db(struct callback_data *p){
  if( p->db==0 ){
    sqlite3_open(p->zDbFilename, &p->db);
    db = p->db;
    if( db && sqlite3_errcode(db)==SQLITE_OK ){
      sqlite3_create_function(db, "shellstatic", 0, SQLITE_UTF8, 0,
          shellstaticFunc, 0, 0);
    }
    if( db==0 || SQLITE_OK!=sqlite3_errcode(db) ){
      fprintf(stderr,"Error: unable to open database \"%s\": %s\n", 
          p->zDbFilename, sqlite3_errmsg(db));
      exit(1);
    }
#ifndef SQLITE_OMIT_LOAD_EXTENSION
    sqlite3_enable_load_extension(p->db, 1);
#endif
  }
}

/*
** Do C-language style dequoting.
**
**    \t    -> tab
**    \n    -> newline
**    \r    -> carriage return
**    \NNN  -> ascii character NNN in octal
**    \\    -> backslash
*/
static void resolve_backslashes(char *z){
  int i, j;
  char c;
  for(i=j=0; (c = z[i])!=0; i++, j++){
    if( c=='\\' ){
      c = z[++i];
      if( c=='n' ){
        c = '\n';
      }else if( c=='t' ){
        c = '\t';
      }else if( c=='r' ){
        c = '\r';
      }else if( c>='0' && c<='7' ){
        c -= '0';
        if( z[i+1]>='0' && z[i+1]<='7' ){
          i++;
          c = (c<<3) + z[i] - '0';
          if( z[i+1]>='0' && z[i+1]<='7' ){
            i++;
            c = (c<<3) + z[i] - '0';
          }
        }
      }
    }
    z[j] = c;
  }
  z[j] = 0;
}

/*
** Interpret zArg as a boolean value.  Return either 0 or 1.
*/
static int booleanValue(char *zArg){
  int val = atoi(zArg);
  int j;
  for(j=0; zArg[j]; j++){
    zArg[j] = (char)tolower(zArg[j]);
  }
  if( strcmp(zArg,"on")==0 ){
    val = 1;
  }else if( strcmp(zArg,"yes")==0 ){
    val = 1;
  }
  return val;
}

/*
** If an input line begins with "." then invoke this routine to
** process that line.
**
** Return 1 on error, 2 to exit, and 0 otherwise.
*/
static int do_meta_command(char *zLine, struct callback_data *p){
  int i = 1;
  int nArg = 0;
  int n, c;
  int rc = 0;
  char *azArg[50];

  /* Parse the input line into tokens.
  */
  while( zLine[i] && nArg<ArraySize(azArg) ){
    while( isspace((unsigned char)zLine[i]) ){ i++; }
    if( zLine[i]==0 ) break;
    if( zLine[i]=='\'' || zLine[i]=='"' ){
      int delim = zLine[i++];
      azArg[nArg++] = &zLine[i];
      while( zLine[i] && zLine[i]!=delim ){ i++; }
      if( zLine[i]==delim ){
        zLine[i++] = 0;
      }
      if( delim=='"' ) resolve_backslashes(azArg[nArg-1]);
    }else{
      azArg[nArg++] = &zLine[i];
      while( zLine[i] && !isspace((unsigned char)zLine[i]) ){ i++; }
      if( zLine[i] ) zLine[i++] = 0;
      resolve_backslashes(azArg[nArg-1]);
    }
  }

  /* Process the input line.
  */
  if( nArg==0 ) return 0; /* no tokens, no error */
  n = strlen30(azArg[0]);
  c = azArg[0][0];
  if( c=='b' && n>=3 && strncmp(azArg[0], "backup", n)==0 && nArg>1 && nArg<4){
    const char *zDestFile;
    const char *zDb;
    sqlite3 *pDest;
    sqlite3_backup *pBackup;
    if( nArg==2 ){
      zDestFile = azArg[1];
      zDb = "main";
    }else{
      zDestFile = azArg[2];
      zDb = azArg[1];
    }
    rc = sqlite3_open(zDestFile, &pDest);
    if( rc!=SQLITE_OK ){
      fprintf(stderr, "Error: cannot open \"%s\"\n", zDestFile);
      sqlite3_close(pDest);
      return 1;
    }
    open_db(p);
    pBackup = sqlite3_backup_init(pDest, "main", p->db, zDb);
    if( pBackup==0 ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest));
      sqlite3_close(pDest);
      return 1;
    }
    while(  (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK ){}
    sqlite3_backup_finish(pBackup);
    if( rc==SQLITE_DONE ){
      rc = 0;
    }else{
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest));
      rc = 1;
    }
    sqlite3_close(pDest);
  }else

  if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 && nArg>1 && nArg<3 ){
    bail_on_error = booleanValue(azArg[1]);
  }else

  if( c=='d' && n>1 && strncmp(azArg[0], "databases", n)==0 && nArg==1 ){
    struct callback_data data;
    char *zErrMsg = 0;
    open_db(p);
    memcpy(&data, p, sizeof(data));
    data.showHeader = 1;
    data.mode = MODE_Column;
    data.colWidth[0] = 3;
    data.colWidth[1] = 15;
    data.colWidth[2] = 58;
    data.cnt = 0;
    sqlite3_exec(p->db, "PRAGMA database_list; ", callback, &data, &zErrMsg);
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }
  }else

  if( c=='d' && strncmp(azArg[0], "dump", n)==0 && nArg<3 ){
    char *zErrMsg = 0;
    open_db(p);
    /* When playing back a "dump", the content might appear in an order
    ** which causes immediate foreign key constraints to be violated.
    ** So disable foreign-key constraint enforcement to prevent problems. */
    fprintf(p->out, "PRAGMA foreign_keys=OFF;\n");
    fprintf(p->out, "BEGIN TRANSACTION;\n");
    p->writableSchema = 0;
    sqlite3_exec(p->db, "PRAGMA writable_schema=ON", 0, 0, 0);
    if( nArg==1 ){
      run_schema_dump_query(p, 
        "SELECT name, type, sql FROM sqlite_master "
        "WHERE sql NOT NULL AND type=='table' AND name!='sqlite_sequence'", 0
      );
      run_schema_dump_query(p, 
        "SELECT name, type, sql FROM sqlite_master "
        "WHERE name=='sqlite_sequence'", 0
      );
      run_table_dump_query(p->out, p->db,
        "SELECT sql FROM sqlite_master "
        "WHERE sql NOT NULL AND type IN ('index','trigger','view')", 0
      );
    }else{
      int i;
      for(i=1; i<nArg; i++){
        zShellStatic = azArg[i];
        run_schema_dump_query(p,
          "SELECT name, type, sql FROM sqlite_master "
          "WHERE tbl_name LIKE shellstatic() AND type=='table'"
          "  AND sql NOT NULL", 0);
        run_table_dump_query(p->out, p->db,
          "SELECT sql FROM sqlite_master "
          "WHERE sql NOT NULL"
          "  AND type IN ('index','trigger','view')"
          "  AND tbl_name LIKE shellstatic()", 0
        );
        zShellStatic = 0;
      }
    }
    if( p->writableSchema ){
      fprintf(p->out, "PRAGMA writable_schema=OFF;\n");
      p->writableSchema = 0;
    }
    sqlite3_exec(p->db, "PRAGMA writable_schema=OFF", 0, 0, 0);
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
    }else{
      fprintf(p->out, "COMMIT;\n");
    }
  }else

  if( c=='e' && strncmp(azArg[0], "echo", n)==0 && nArg>1 && nArg<3 ){
    p->echoOn = booleanValue(azArg[1]);
  }else

  if( c=='e' && strncmp(azArg[0], "exit", n)==0  && nArg==1 ){
    rc = 2;
  }else

  if( c=='e' && strncmp(azArg[0], "explain", n)==0 && nArg<3 ){
    int val = nArg>=2 ? booleanValue(azArg[1]) : 1;
    if(val == 1) {
      if(!p->explainPrev.valid) {
        p->explainPrev.valid = 1;
        p->explainPrev.mode = p->mode;
        p->explainPrev.showHeader = p->showHeader;
        memcpy(p->explainPrev.colWidth,p->colWidth,sizeof(p->colWidth));
      }
      /* We could put this code under the !p->explainValid
      ** condition so that it does not execute if we are already in
      ** explain mode. However, always executing it allows us an easy
      ** was to reset to explain mode in case the user previously
      ** did an .explain followed by a .width, .mode or .header
      ** command.
      */
      p->mode = MODE_Explain;
      p->showHeader = 1;
      memset(p->colWidth,0,ArraySize(p->colWidth));
      p->colWidth[0] = 4;                  /* addr */
      p->colWidth[1] = 13;                 /* opcode */
      p->colWidth[2] = 4;                  /* P1 */
      p->colWidth[3] = 4;                  /* P2 */
      p->colWidth[4] = 4;                  /* P3 */
      p->colWidth[5] = 13;                 /* P4 */
      p->colWidth[6] = 2;                  /* P5 */
      p->colWidth[7] = 13;                  /* Comment */
    }else if (p->explainPrev.valid) {
      p->explainPrev.valid = 0;
      p->mode = p->explainPrev.mode;
      p->showHeader = p->explainPrev.showHeader;
      memcpy(p->colWidth,p->explainPrev.colWidth,sizeof(p->colWidth));
    }
  }else

  if( c=='h' && (strncmp(azArg[0], "header", n)==0 ||
                 strncmp(azArg[0], "headers", n)==0) && nArg>1 && nArg<3 ){
    p->showHeader = booleanValue(azArg[1]);
  }else

  if( c=='h' && strncmp(azArg[0], "help", n)==0 ){
    fprintf(stderr,"%s",zHelp);
    if( HAS_TIMER ){
      fprintf(stderr,"%s",zTimerHelp);
    }
  }else

  if( c=='i' && strncmp(azArg[0], "import", n)==0 && nArg==3 ){
    char *zTable = azArg[2];    /* Insert data into this table */
    char *zFile = azArg[1];     /* The file from which to extract data */
    sqlite3_stmt *pStmt = NULL; /* A statement */
    int nCol;                   /* Number of columns in the table */
    int nByte;                  /* Number of bytes in an SQL string */
    int i, j;                   /* Loop counters */
    int nSep;                   /* Number of bytes in p->separator[] */
    char *zSql;                 /* An SQL statement */
    char *zLine;                /* A single line of input from the file */
    char **azCol;               /* zLine[] broken up into columns */
    char *zCommit;              /* How to commit changes */   
    FILE *in;                   /* The input file */
    int lineno = 0;             /* Line number of input file */

    open_db(p);
    nSep = strlen30(p->separator);
    if( nSep==0 ){
      fprintf(stderr, "Error: non-null separator required for import\n");
      return 1;
    }
    zSql = sqlite3_mprintf("SELECT * FROM '%q'", zTable);
    if( zSql==0 ){
      fprintf(stderr, "Error: out of memory\n");
      return 1;
    }
    nByte = strlen30(zSql);
    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
    sqlite3_free(zSql);
    if( rc ){
      if (pStmt) sqlite3_finalize(pStmt);
      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
      return 1;
    }
    nCol = sqlite3_column_count(pStmt);
    sqlite3_finalize(pStmt);
    pStmt = 0;
    if( nCol==0 ) return 0; /* no columns, no error */
    zSql = malloc( nByte + 20 + nCol*2 );
    if( zSql==0 ){
      fprintf(stderr, "Error: out of memory\n");
      return 1;
    }
    sqlite3_snprintf(nByte+20, zSql, "INSERT INTO '%q' VALUES(?", zTable);
    j = strlen30(zSql);
    for(i=1; i<nCol; i++){
      zSql[j++] = ',';
      zSql[j++] = '?';
    }
    zSql[j++] = ')';
    zSql[j] = 0;
    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
    free(zSql);
    if( rc ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db));
      if (pStmt) sqlite3_finalize(pStmt);
      return 1;
    }
    in = fopen(zFile, "rb");
    if( in==0 ){
      fprintf(stderr, "Error: cannot open \"%s\"\n", zFile);
      sqlite3_finalize(pStmt);
      return 1;
    }
    azCol = malloc( sizeof(azCol[0])*(nCol+1) );
    if( azCol==0 ){
      fprintf(stderr, "Error: out of memory\n");
      fclose(in);
      sqlite3_finalize(pStmt);
      return 1;
    }
    sqlite3_exec(p->db, "BEGIN", 0, 0, 0);
    zCommit = "COMMIT";
    while( (zLine = local_getline(0, in))!=0 ){
      char *z;
      i = 0;
      lineno++;
      azCol[0] = zLine;
      for(i=0, z=zLine; *z && *z!='\n' && *z!='\r'; z++){
        if( *z==p->separator[0] && strncmp(z, p->separator, nSep)==0 ){
          *z = 0;
          i++;
          if( i<nCol ){
            azCol[i] = &z[nSep];
            z += nSep-1;
          }
        }
      } /* end for */
      *z = 0;
      if( i+1!=nCol ){
        fprintf(stderr,
                "Error: %s line %d: expected %d columns of data but found %d\n",
                zFile, lineno, nCol, i+1);
        zCommit = "ROLLBACK";
        free(zLine);
        rc = 1;
        break; /* from while */
      }
      for(i=0; i<nCol; i++){
        sqlite3_bind_text(pStmt, i+1, azCol[i], -1, SQLITE_STATIC);
      }
      sqlite3_step(pStmt);
      rc = sqlite3_reset(pStmt);
      free(zLine);
      if( rc!=SQLITE_OK ){
        fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
        zCommit = "ROLLBACK";
        rc = 1;
        break; /* from while */
      }
    } /* end while */
    free(azCol);
    fclose(in);
    sqlite3_finalize(pStmt);
    sqlite3_exec(p->db, zCommit, 0, 0, 0);
  }else

  if( c=='i' && strncmp(azArg[0], "indices", n)==0 && nArg<3 ){
    struct callback_data data;
    char *zErrMsg = 0;
    open_db(p);
    memcpy(&data, p, sizeof(data));
    data.showHeader = 0;
    data.mode = MODE_List;
    if( nArg==1 ){
      rc = sqlite3_exec(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type='index' AND name NOT LIKE 'sqlite_%' "
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type='index' "
        "ORDER BY 1",
        callback, &data, &zErrMsg
      );
    }else{
      zShellStatic = azArg[1];
      rc = sqlite3_exec(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type='index' AND tbl_name LIKE shellstatic() "
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type='index' AND tbl_name LIKE shellstatic() "
        "ORDER BY 1",
        callback, &data, &zErrMsg
      );
      zShellStatic = 0;
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }else if( rc != SQLITE_OK ){
      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
      rc = 1;
    }
  }else

#ifdef SQLITE_ENABLE_IOTRACE
  if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){
    extern void (*sqlite3IoTrace)(const char*, ...);
    if( iotrace && iotrace!=stdout ) fclose(iotrace);
    iotrace = 0;
    if( nArg<2 ){
      sqlite3IoTrace = 0;
    }else if( strcmp(azArg[1], "-")==0 ){
      sqlite3IoTrace = iotracePrintf;
      iotrace = stdout;
    }else{
      iotrace = fopen(azArg[1], "w");
      if( iotrace==0 ){
        fprintf(stderr, "Error: cannot open \"%s\"\n", azArg[1]);
        sqlite3IoTrace = 0;
        rc = 1;
      }else{
        sqlite3IoTrace = iotracePrintf;
      }
    }
  }else
#endif

#ifndef SQLITE_OMIT_LOAD_EXTENSION
  if( c=='l' && strncmp(azArg[0], "load", n)==0 && nArg>=2 ){
    const char *zFile, *zProc;
    char *zErrMsg = 0;
    zFile = azArg[1];
    zProc = nArg>=3 ? azArg[2] : 0;
    open_db(p);
    rc = sqlite3_load_extension(p->db, zFile, zProc, &zErrMsg);
    if( rc!=SQLITE_OK ){
      fprintf(stderr, "Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }
  }else
#endif

  if( c=='l' && strncmp(azArg[0], "log", n)==0 && nArg>=1 ){
    const char *zFile = azArg[1];
    if( p->pLog && p->pLog!=stdout && p->pLog!=stderr ){
      fclose(p->pLog);
      p->pLog = 0;
    }
    if( strcmp(zFile,"stdout")==0 ){
      p->pLog = stdout;
    }else if( strcmp(zFile, "stderr")==0 ){
      p->pLog = stderr;
    }else if( strcmp(zFile, "off")==0 ){
      p->pLog = 0;
    }else{
      p->pLog = fopen(zFile, "w");
      if( p->pLog==0 ){
        fprintf(stderr, "Error: cannot open \"%s\"\n", zFile);
      }
    }
  }else

  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==2 ){
    int n2 = strlen30(azArg[1]);
    if( (n2==4 && strncmp(azArg[1],"line",n2)==0)
        ||
        (n2==5 && strncmp(azArg[1],"lines",n2)==0) ){
      p->mode = MODE_Line;
    }else if( (n2==6 && strncmp(azArg[1],"column",n2)==0)
              ||
              (n2==7 && strncmp(azArg[1],"columns",n2)==0) ){
      p->mode = MODE_Column;
    }else if( n2==4 && strncmp(azArg[1],"list",n2)==0 ){
      p->mode = MODE_List;
    }else if( n2==4 && strncmp(azArg[1],"html",n2)==0 ){
      p->mode = MODE_Html;
    }else if( n2==3 && strncmp(azArg[1],"tcl",n2)==0 ){
      p->mode = MODE_Tcl;
    }else if( n2==3 && strncmp(azArg[1],"csv",n2)==0 ){
      p->mode = MODE_Csv;
      sqlite3_snprintf(sizeof(p->separator), p->separator, ",");
    }else if( n2==4 && strncmp(azArg[1],"tabs",n2)==0 ){
      p->mode = MODE_List;
      sqlite3_snprintf(sizeof(p->separator), p->separator, "\t");
    }else if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
      p->mode = MODE_Insert;
      set_table_name(p, "table");
    }else {
      fprintf(stderr,"Error: mode should be one of: "
         "column csv html insert line list tabs tcl\n");
      rc = 1;
    }
  }else

  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==3 ){
    int n2 = strlen30(azArg[1]);
    if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
      p->mode = MODE_Insert;
      set_table_name(p, azArg[2]);
    }else {
      fprintf(stderr, "Error: invalid arguments: "
        " \"%s\". Enter \".help\" for help\n", azArg[2]);
      rc = 1;
    }
  }else

  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 && nArg==2 ) {
    sqlite3_snprintf(sizeof(p->nullvalue), p->nullvalue,
                     "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]);
  }else

  if( c=='o' && strncmp(azArg[0], "output", n)==0 && nArg==2 ){
    if( p->out!=stdout ){
      fclose(p->out);
    }
    if( strcmp(azArg[1],"stdout")==0 ){
      p->out = stdout;
      sqlite3_snprintf(sizeof(p->outfile), p->outfile, "stdout");
    }else{
      p->out = fopen(azArg[1], "wb");
      if( p->out==0 ){
        fprintf(stderr,"Error: cannot write to \"%s\"\n", azArg[1]);
        p->out = stdout;
        rc = 1;
      } else {
         sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", azArg[1]);
      }
    }
  }else

  if( c=='p' && strncmp(azArg[0], "prompt", n)==0 && (nArg==2 || nArg==3)){
    if( nArg >= 2) {
      strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1);
    }
    if( nArg >= 3) {
      strncpy(continuePrompt,azArg[2],(int)ArraySize(continuePrompt)-1);
    }
  }else

  if( c=='q' && strncmp(azArg[0], "quit", n)==0 && nArg==1 ){
    rc = 2;
  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 && nArg==2 ){
    FILE *alt = fopen(azArg[1], "rb");
    if( alt==0 ){
      fprintf(stderr,"Error: cannot open \"%s\"\n", azArg[1]);
      rc = 1;
    }else{
      rc = process_input(p, alt);
      fclose(alt);
    }
  }else

  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 && nArg>1 && nArg<4){
    const char *zSrcFile;
    const char *zDb;
    sqlite3 *pSrc;
    sqlite3_backup *pBackup;
    int nTimeout = 0;

    if( nArg==2 ){
      zSrcFile = azArg[1];
      zDb = "main";
    }else{
      zSrcFile = azArg[2];
      zDb = azArg[1];
    }
    rc = sqlite3_open(zSrcFile, &pSrc);
    if( rc!=SQLITE_OK ){
      fprintf(stderr, "Error: cannot open \"%s\"\n", zSrcFile);
      sqlite3_close(pSrc);
      return 1;
    }
    open_db(p);
    pBackup = sqlite3_backup_init(p->db, zDb, pSrc, "main");
    if( pBackup==0 ){
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
      sqlite3_close(pSrc);
      return 1;
    }
    while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK
          || rc==SQLITE_BUSY  ){
      if( rc==SQLITE_BUSY ){
        if( nTimeout++ >= 3 ) break;
        sqlite3_sleep(100);
      }
    }
    sqlite3_backup_finish(pBackup);
    if( rc==SQLITE_DONE ){
      rc = 0;
    }else if( rc==SQLITE_BUSY || rc==SQLITE_LOCKED ){
      fprintf(stderr, "Error: source database is busy\n");
      rc = 1;
    }else{
      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
      rc = 1;
    }
    sqlite3_close(pSrc);
  }else

  if( c=='s' && strncmp(azArg[0], "schema", n)==0 && nArg<3 ){
    struct callback_data data;
    char *zErrMsg = 0;
    open_db(p);
    memcpy(&data, p, sizeof(data));
    data.showHeader = 0;
    data.mode = MODE_Semi;
    if( nArg>1 ){
      int i;
      for(i=0; azArg[1][i]; i++) azArg[1][i] = (char)tolower(azArg[1][i]);
      if( strcmp(azArg[1],"sqlite_master")==0 ){
        char *new_argv[2], *new_colv[2];
        new_argv[0] = "CREATE TABLE sqlite_master (\n"
                      "  type text,\n"
                      "  name text,\n"
                      "  tbl_name text,\n"
                      "  rootpage integer,\n"
                      "  sql text\n"
                      ")";
        new_argv[1] = 0;
        new_colv[0] = "sql";
        new_colv[1] = 0;
        callback(&data, 1, new_argv, new_colv);
        rc = SQLITE_OK;
      }else if( strcmp(azArg[1],"sqlite_temp_master")==0 ){
        char *new_argv[2], *new_colv[2];
        new_argv[0] = "CREATE TEMP TABLE sqlite_temp_master (\n"
                      "  type text,\n"
                      "  name text,\n"
                      "  tbl_name text,\n"
                      "  rootpage integer,\n"
                      "  sql text\n"
                      ")";
        new_argv[1] = 0;
        new_colv[0] = "sql";
        new_colv[1] = 0;
        callback(&data, 1, new_argv, new_colv);
        rc = SQLITE_OK;
      }else{
        zShellStatic = azArg[1];
        rc = sqlite3_exec(p->db,
          "SELECT sql FROM "
          "  (SELECT sql sql, type type, tbl_name tbl_name, name name"
          "     FROM sqlite_master UNION ALL"
          "   SELECT sql, type, tbl_name, name FROM sqlite_temp_master) "
          "WHERE tbl_name LIKE shellstatic() AND type!='meta' AND sql NOTNULL "
          "ORDER BY substr(type,2,1), name",
          callback, &data, &zErrMsg);
        zShellStatic = 0;
      }
    }else{
      rc = sqlite3_exec(p->db,
         "SELECT sql FROM "
         "  (SELECT sql sql, type type, tbl_name tbl_name, name name"
         "     FROM sqlite_master UNION ALL"
         "   SELECT sql, type, tbl_name, name FROM sqlite_temp_master) "
         "WHERE type!='meta' AND sql NOTNULL AND name NOT LIKE 'sqlite_%'"
         "ORDER BY substr(type,2,1), name",
         callback, &data, &zErrMsg
      );
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }else if( rc != SQLITE_OK ){
      fprintf(stderr,"Error: querying schema information\n");
      rc = 1;
    }else{
      rc = 0;
    }
  }else

  if( c=='s' && strncmp(azArg[0], "separator", n)==0 && nArg==2 ){
    sqlite3_snprintf(sizeof(p->separator), p->separator,
                     "%.*s", (int)sizeof(p->separator)-1, azArg[1]);
  }else

  if( c=='s' && strncmp(azArg[0], "show", n)==0 && nArg==1 ){
    int i;
    fprintf(p->out,"%9.9s: %s\n","echo", p->echoOn ? "on" : "off");
    fprintf(p->out,"%9.9s: %s\n","explain", p->explainPrev.valid ? "on" :"off");
    fprintf(p->out,"%9.9s: %s\n","headers", p->showHeader ? "on" : "off");
    fprintf(p->out,"%9.9s: %s\n","mode", modeDescr[p->mode]);
    fprintf(p->out,"%9.9s: ", "nullvalue");
      output_c_string(p->out, p->nullvalue);
      fprintf(p->out, "\n");
    fprintf(p->out,"%9.9s: %s\n","output",
            strlen30(p->outfile) ? p->outfile : "stdout");
    fprintf(p->out,"%9.9s: ", "separator");
      output_c_string(p->out, p->separator);
      fprintf(p->out, "\n");
    fprintf(p->out,"%9.9s: %s\n","stats", p->statsOn ? "on" : "off");
    fprintf(p->out,"%9.9s: ","width");
    for (i=0;i<(int)ArraySize(p->colWidth) && p->colWidth[i] != 0;i++) {
      fprintf(p->out,"%d ",p->colWidth[i]);
    }
    fprintf(p->out,"\n");
  }else

  if( c=='s' && strncmp(azArg[0], "stats", n)==0 && nArg>1 && nArg<3 ){
    p->statsOn = booleanValue(azArg[1]);
  }else

  if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 && nArg<3 ){
    char **azResult;
    int nRow;
    char *zErrMsg;
    open_db(p);
    if( nArg==1 ){
      rc = sqlite3_get_table(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type IN ('table','view') AND name NOT LIKE 'sqlite_%' "
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type IN ('table','view') "
        "ORDER BY 1",
        &azResult, &nRow, 0, &zErrMsg
      );
    }else{
      zShellStatic = azArg[1];
      rc = sqlite3_get_table(p->db,
        "SELECT name FROM sqlite_master "
        "WHERE type IN ('table','view') AND name LIKE shellstatic() "
        "UNION ALL "
        "SELECT name FROM sqlite_temp_master "
        "WHERE type IN ('table','view') AND name LIKE shellstatic() "
        "ORDER BY 1",
        &azResult, &nRow, 0, &zErrMsg
      );
      zShellStatic = 0;
    }
    if( zErrMsg ){
      fprintf(stderr,"Error: %s\n", zErrMsg);
      sqlite3_free(zErrMsg);
      rc = 1;
    }else if( rc != SQLITE_OK ){
      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
      rc = 1;
    }else{
      int len, maxlen = 0;
      int i, j;
      int nPrintCol, nPrintRow;
      for(i=1; i<=nRow; i++){
        if( azResult[i]==0 ) continue;
        len = strlen30(azResult[i]);
        if( len>maxlen ) maxlen = len;
      }
      nPrintCol = 80/(maxlen+2);
      if( nPrintCol<1 ) nPrintCol = 1;
      nPrintRow = (nRow + nPrintCol - 1)/nPrintCol;
      for(i=0; i<nPrintRow; i++){
        for(j=i+1; j<=nRow; j+=nPrintRow){
          char *zSp = j<=nPrintRow ? "" : "  ";
          printf("%s%-*s", zSp, maxlen, azResult[j] ? azResult[j] : "");
        }
        printf("\n");
      }
    }
    sqlite3_free_table(azResult);
  }else

  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){
    open_db(p);
    sqlite3_busy_timeout(p->db, atoi(azArg[1]));
  }else
    
  if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0 && nArg==2 ){
    enableTimer = booleanValue(azArg[1]);
  }else
  
  if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){
    int j;
    assert( nArg<=ArraySize(azArg) );
    for(j=1; j<nArg && j<ArraySize(p->colWidth); j++){
      p->colWidth[j-1] = atoi(azArg[j]);
    }
  }else

  {
    fprintf(stderr, "Error: unknown command or invalid arguments: "
      " \"%s\". Enter \".help\" for help\n", azArg[0]);
    rc = 1;
  }

  return rc;
}

/*
** Return TRUE if a semicolon occurs anywhere in the first N characters
** of string z[].
*/
static int _contains_semicolon(const char *z, int N){
  int i;
  for(i=0; i<N; i++){  if( z[i]==';' ) return 1; }
  return 0;
}

/*
** Test to see if a line consists entirely of whitespace.
*/
static int _all_whitespace(const char *z){
  for(; *z; z++){
    if( isspace(*(unsigned char*)z) ) continue;
    if( *z=='/' && z[1]=='*' ){
      z += 2;
      while( *z && (*z!='*' || z[1]!='/') ){ z++; }
      if( *z==0 ) return 0;
      z++;
      continue;
    }
    if( *z=='-' && z[1]=='-' ){
      z += 2;
      while( *z && *z!='\n' ){ z++; }
      if( *z==0 ) return 1;
      continue;
    }
    return 0;
  }
  return 1;
}

/*
** Return TRUE if the line typed in is an SQL command terminator other
** than a semi-colon.  The SQL Server style "go" command is understood
** as is the Oracle "/".
*/
static int _is_command_terminator(const char *zLine){
  while( isspace(*(unsigned char*)zLine) ){ zLine++; };
  if( zLine[0]=='/' && _all_whitespace(&zLine[1]) ){
    return 1;  /* Oracle */
  }
  if( tolower(zLine[0])=='g' && tolower(zLine[1])=='o'
         && _all_whitespace(&zLine[2]) ){
    return 1;  /* SQL Server */
  }
  return 0;
}

/*
** Return true if zSql is a complete SQL statement.  Return false if it
** ends in the middle of a string literal or C-style comment.
*/
static int _is_complete(char *zSql, int nSql){
  int rc;
  if( zSql==0 ) return 1;
  zSql[nSql] = ';';
  zSql[nSql+1] = 0;
  rc = sqlite3_complete(zSql);
  zSql[nSql] = 0;
  return rc;
}

/*
** Read input from *in and process it.  If *in==0 then input
** is interactive - the user is typing it it.  Otherwise, input
** is coming from a file or device.  A prompt is issued and history
** is saved only if input is interactive.  An interrupt signal will
** cause this routine to exit immediately, unless input is interactive.
**
** Return the number of errors.
*/
static int process_input(struct callback_data *p, FILE *in){
  char *zLine = 0;
  char *zSql = 0;
  int nSql = 0;
  int nSqlPrior = 0;
  char *zErrMsg;
  int rc;
  int errCnt = 0;
  int lineno = 0;
  int startline = 0;

  while( errCnt==0 || !bail_on_error || (in==0 && stdin_is_interactive) ){
    fflush(p->out);
    free(zLine);
    zLine = one_input_line(zSql, in);
    if( zLine==0 ){
      break;  /* We have reached EOF */
    }
    if( seenInterrupt ){
      if( in!=0 ) break;
      seenInterrupt = 0;
    }
    lineno++;
    if( (zSql==0 || zSql[0]==0) && _all_whitespace(zLine) ) continue;
    if( zLine && zLine[0]=='.' && nSql==0 ){
      if( p->echoOn ) printf("%s\n", zLine);
      rc = do_meta_command(zLine, p);
      if( rc==2 ){ /* exit requested */
        break;
      }else if( rc ){
        errCnt++;
      }
      continue;
    }
    if( _is_command_terminator(zLine) && _is_complete(zSql, nSql) ){
      memcpy(zLine,";",2);
    }
    nSqlPrior = nSql;
    if( zSql==0 ){
      int i;
      for(i=0; zLine[i] && isspace((unsigned char)zLine[i]); i++){}
      if( zLine[i]!=0 ){
        nSql = strlen30(zLine);
        zSql = malloc( nSql+3 );
        if( zSql==0 ){
          fprintf(stderr, "Error: out of memory\n");
          exit(1);
        }
        memcpy(zSql, zLine, nSql+1);
        startline = lineno;
      }
    }else{
      int len = strlen30(zLine);
      zSql = realloc( zSql, nSql + len + 4 );
      if( zSql==0 ){
        fprintf(stderr,"Error: out of memory\n");
        exit(1);
      }
      zSql[nSql++] = '\n';
      memcpy(&zSql[nSql], zLine, len+1);
      nSql += len;
    }
    if( zSql && _contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior)
                && sqlite3_complete(zSql) ){
      p->cnt = 0;
      open_db(p);
      BEGIN_TIMER;
      rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg);
      END_TIMER;
      if( rc || zErrMsg ){
        char zPrefix[100];
        if( in!=0 || !stdin_is_interactive ){
          sqlite3_snprintf(sizeof(zPrefix), zPrefix, 
                           "Error: near line %d:", startline);
        }else{
          sqlite3_snprintf(sizeof(zPrefix), zPrefix, "Error:");
        }
        if( zErrMsg!=0 ){
          fprintf(stderr, "%s %s\n", zPrefix, zErrMsg);
          sqlite3_free(zErrMsg);
          zErrMsg = 0;
        }else{
          fprintf(stderr, "%s %s\n", zPrefix, sqlite3_errmsg(p->db));
        }
        errCnt++;
      }
      free(zSql);
      zSql = 0;
      nSql = 0;
    }
  }
  if( zSql ){
    if( !_all_whitespace(zSql) ) fprintf(stderr, "Error: incomplete SQL: %s\n", zSql);
    free(zSql);
  }
  free(zLine);
  return errCnt;
}

/*
** Return a pathname which is the user's home directory.  A
** 0 return indicates an error of some kind.  Space to hold the
** resulting string is obtained from malloc().  The calling
** function should free the result.
*/
static char *find_home_dir(void){
  char *home_dir = NULL;

#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(_WIN32_WCE) && !defined(__RTP__) && !defined(_WRS_KERNEL)
  struct passwd *pwent;
  uid_t uid = getuid();
  if( (pwent=getpwuid(uid)) != NULL) {
    home_dir = pwent->pw_dir;
  }
#endif

#if defined(_WIN32_WCE)
  /* Windows CE (arm-wince-mingw32ce-gcc) does not provide getenv()
   */
  home_dir = strdup("/");
#else

#if defined(_WIN32) || defined(WIN32) || defined(__OS2__)
  if (!home_dir) {
    home_dir = getenv("USERPROFILE");
  }
#endif

  if (!home_dir) {
    home_dir = getenv("HOME");
  }

#if defined(_WIN32) || defined(WIN32) || defined(__OS2__)
  if (!home_dir) {
    char *zDrive, *zPath;
    int n;
    zDrive = getenv("HOMEDRIVE");
    zPath = getenv("HOMEPATH");
    if( zDrive && zPath ){
      n = strlen30(zDrive) + strlen30(zPath) + 1;
      home_dir = malloc( n );
      if( home_dir==0 ) return 0;
      sqlite3_snprintf(n, home_dir, "%s%s", zDrive, zPath);
      return home_dir;
    }
    home_dir = "c:\\";
  }
#endif

#endif /* !_WIN32_WCE */

  if( home_dir ){
    int n = strlen30(home_dir) + 1;
    char *z = malloc( n );
    if( z ) memcpy(z, home_dir, n);
    home_dir = z;
  }

  return home_dir;
}

/*
** Read input from the file given by sqliterc_override.  Or if that
** parameter is NULL, take input from ~/.sqliterc
**
** Returns the number of errors.
*/
static int process_sqliterc(
  struct callback_data *p,        /* Configuration data */
  const char *sqliterc_override   /* Name of config file. NULL to use default */
){
  char *home_dir = NULL;
  const char *sqliterc = sqliterc_override;
  char *zBuf = 0;
  FILE *in = NULL;
  int nBuf;
  int rc = 0;

  if (sqliterc == NULL) {
    home_dir = find_home_dir();
    if( home_dir==0 ){
#if !defined(__RTP__) && !defined(_WRS_KERNEL)
      fprintf(stderr,"%s: Error: cannot locate your home directory\n", Argv0);
#endif
      return 1;
    }
    nBuf = strlen30(home_dir) + 16;
    zBuf = malloc( nBuf );
    if( zBuf==0 ){
      fprintf(stderr,"%s: Error: out of memory\n",Argv0);
      return 1;
    }
    sqlite3_snprintf(nBuf, zBuf,"%s/.sqliterc",home_dir);
    free(home_dir);
    sqliterc = (const char*)zBuf;
  }
  in = fopen(sqliterc,"rb");
  if( in ){
    if( stdin_is_interactive ){
      fprintf(stderr,"-- Loading resources from %s\n",sqliterc);
    }
    rc = process_input(p,in);
    fclose(in);
  }
  free(zBuf);
  return rc;
}

/*
** Show available command line options
*/
static const char zOptions[] = 
  "   -help                show this message\n"
  "   -init filename       read/process named file\n"
  "   -echo                print commands before execution\n"
  "   -[no]header          turn headers on or off\n"
  "   -bail                stop after hitting an error\n"
  "   -interactive         force interactive I/O\n"
  "   -batch               force batch I/O\n"
  "   -column              set output mode to 'column'\n"
  "   -csv                 set output mode to 'csv'\n"
  "   -html                set output mode to HTML\n"
  "   -line                set output mode to 'line'\n"
  "   -list                set output mode to 'list'\n"
  "   -separator 'x'       set output field separator (|)\n"
  "   -stats               print memory stats before each finalize\n"
  "   -nullvalue 'text'    set text string for NULL values\n"
  "   -version             show SQLite version\n"
;
static void usage(int showDetail){
  fprintf(stderr,
      "Usage: %s [OPTIONS] FILENAME [SQL]\n"  
      "FILENAME is the name of an SQLite database. A new database is created\n"
      "if the file does not previously exist.\n", Argv0);
  if( showDetail ){
    fprintf(stderr, "OPTIONS include:\n%s", zOptions);
  }else{
    fprintf(stderr, "Use the -help option for additional information\n");
  }
  exit(1);
}

/*
** Initialize the state information in data
*/
static void main_init(struct callback_data *data) {
  memset(data, 0, sizeof(*data));
  data->mode = MODE_List;
  memcpy(data->separator,"|", 2);
  data->showHeader = 0;
  sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data);
  sqlite3_snprintf(sizeof(mainPrompt), mainPrompt,"sqlite> ");
  sqlite3_snprintf(sizeof(continuePrompt), continuePrompt,"   ...> ");
  sqlite3_config(SQLITE_CONFIG_SINGLETHREAD);
}

int main(int argc, char **argv){
  char *zErrMsg = 0;
  struct callback_data data;
  const char *zInitFile = 0;
  char *zFirstCmd = 0;
  int i;
  int rc = 0;

  Argv0 = argv[0];
  main_init(&data);
  stdin_is_interactive = isatty(0);

  /* Make sure we have a valid signal handler early, before anything
  ** else is done.
  */
#ifdef SIGINT
  signal(SIGINT, interrupt_handler);
#endif

  /* Do an initial pass through the command-line argument to locate
  ** the name of the database file, the name of the initialization file,
  ** and the first command to execute.
  */
  for(i=1; i<argc-1; i++){
    char *z;
    if( argv[i][0]!='-' ) break;
    z = argv[i];
    if( z[0]=='-' && z[1]=='-' ) z++;
    if( strcmp(argv[i],"-separator")==0 || strcmp(argv[i],"-nullvalue")==0 ){
      i++;
    }else if( strcmp(argv[i],"-init")==0 ){
      i++;
      zInitFile = argv[i];
    /* Need to check for batch mode here to so we can avoid printing
    ** informational messages (like from process_sqliterc) before 
    ** we do the actual processing of arguments later in a second pass.
    */
    }else if( strcmp(argv[i],"-batch")==0 ){
      stdin_is_interactive = 0;
    }
  }
  if( i<argc ){
#if defined(SQLITE_OS_OS2) && SQLITE_OS_OS2
    data.zDbFilename = (const char *)convertCpPathToUtf8( argv[i++] );
#else
    data.zDbFilename = argv[i++];
#endif
  }else{
#ifndef SQLITE_OMIT_MEMORYDB
    data.zDbFilename = ":memory:";
#else
    data.zDbFilename = 0;
#endif
    /***** Begin Fossil Patch *****/
    {
      extern void fossil_open(sqlite3**, const char **);
      fossil_open(&data.db, &data.zDbFilename);
    }
    /***** End Fossil Patch *****/
  }
  if( i<argc ){
    zFirstCmd = argv[i++];
  }
  if( i<argc ){
    fprintf(stderr,"%s: Error: too many options: \"%s\"\n", Argv0, argv[i]);
    fprintf(stderr,"Use -help for a list of options.\n");
    return 1;
  }
  data.out = stdout;

#ifdef SQLITE_OMIT_MEMORYDB
  if( data.zDbFilename==0 ){
    fprintf(stderr,"%s: Error: no database filename specified\n", Argv0);
    return 1;
  }
#endif

  /* Go ahead and open the database file if it already exists.  If the
  ** file does not exist, delay opening it.  This prevents empty database
  ** files from being created if a user mistypes the database name argument
  ** to the sqlite command-line tool.
  */
  if( access(data.zDbFilename, 0)==0 ){
    open_db(&data);
  }

  /* Process the initialization file if there is one.  If no -init option
  ** is given on the command line, look for a file named ~/.sqliterc and
  ** try to process it.
  */
  rc = process_sqliterc(&data,zInitFile);
  if( rc>0 ){
    return rc;
  }

  /* Make a second pass through the command-line argument and set
  ** options.  This second pass is delayed until after the initialization
  ** file is processed so that the command-line arguments will override
  ** settings in the initialization file.
  */
  for(i=1; i<argc && argv[i][0]=='-'; i++){
    char *z = argv[i];
    if( z[1]=='-' ){ z++; }
    if( strcmp(z,"-init")==0 ){
      i++;
    }else if( strcmp(z,"-html")==0 ){
      data.mode = MODE_Html;
    }else if( strcmp(z,"-list")==0 ){
      data.mode = MODE_List;
    }else if( strcmp(z,"-line")==0 ){
      data.mode = MODE_Line;
    }else if( strcmp(z,"-column")==0 ){
      data.mode = MODE_Column;
    }else if( strcmp(z,"-csv")==0 ){
      data.mode = MODE_Csv;
      memcpy(data.separator,",",2);
    }else if( strcmp(z,"-separator")==0 ){
      i++;
      if(i>=argc){
        fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z);
        fprintf(stderr,"Use -help for a list of options.\n");
        return 1;
      }
      sqlite3_snprintf(sizeof(data.separator), data.separator,
                       "%.*s",(int)sizeof(data.separator)-1,argv[i]);
    }else if( strcmp(z,"-nullvalue")==0 ){
      i++;
      if(i>=argc){
        fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z);
        fprintf(stderr,"Use -help for a list of options.\n");
        return 1;
      }
      sqlite3_snprintf(sizeof(data.nullvalue), data.nullvalue,
                       "%.*s",(int)sizeof(data.nullvalue)-1,argv[i]);
    }else if( strcmp(z,"-header")==0 ){
      data.showHeader = 1;
    }else if( strcmp(z,"-noheader")==0 ){
      data.showHeader = 0;
    }else if( strcmp(z,"-echo")==0 ){
      data.echoOn = 1;
    }else if( strcmp(z,"-stats")==0 ){
      data.statsOn = 1;
    }else if( strcmp(z,"-bail")==0 ){
      bail_on_error = 1;
    }else if( strcmp(z,"-version")==0 ){
      printf("%s\n", sqlite3_libversion());
      return 0;
    }else if( strcmp(z,"-interactive")==0 ){
      stdin_is_interactive = 1;
    }else if( strcmp(z,"-batch")==0 ){
      stdin_is_interactive = 0;
    }else if( strcmp(z,"-help")==0 || strcmp(z, "--help")==0 ){
      usage(1);
    }else{
      fprintf(stderr,"%s: Error: unknown option: %s\n", Argv0, z);
      fprintf(stderr,"Use -help for a list of options.\n");
      return 1;
    }
  }

  if( zFirstCmd ){
    /* Run just the command that follows the database name
    */
    if( zFirstCmd[0]=='.' ){
      rc = do_meta_command(zFirstCmd, &data);
    }else{
      open_db(&data);
      rc = shell_exec(data.db, zFirstCmd, shell_callback, &data, &zErrMsg);
      if( zErrMsg!=0 ){
        fprintf(stderr,"Error: %s\n", zErrMsg);
        return rc!=0 ? rc : 1;
      }else if( rc!=0 ){
        fprintf(stderr,"Error: unable to process SQL \"%s\"\n", zFirstCmd);
        return rc;
      }
    }
  }else{
    /* Run commands received from standard input
    */
    if( stdin_is_interactive ){
      char *zHome;
      char *zHistory = 0;
      int nHistory;
      printf(
        "SQLite version %s\n"
        "Enter \".help\" for instructions\n"
        "Enter SQL statements terminated with a \";\"\n",
        sqlite3_libversion()
      );
      zHome = find_home_dir();
      if( zHome ){
        nHistory = strlen30(zHome) + 20;
        if( (zHistory = malloc(nHistory))!=0 ){
          sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome);
        }
      }
#if defined(HAVE_READLINE) && HAVE_READLINE==1
      if( zHistory ) read_history(zHistory);
#endif
      rc = process_input(&data, 0);
      if( zHistory ){
        stifle_history(100);
        write_history(zHistory);
        free(zHistory);
      }
      free(zHome);
    }else{
      rc = process_input(&data, stdin);
    }
  }
  set_table_name(&data, 0);
  if( data.db ){
    if( sqlite3_close(data.db)!=SQLITE_OK ){
      fprintf(stderr,"Error: cannot close database \"%s\"\n",
              sqlite3_errmsg(db));
      rc++;
    }
  }
  return rc;
}

  va_start(ap, zTitleFormat);
  zTitle = vmprintf(zTitleFormat, ap);
  va_end(ap);
  
  cgi_destination(CGI_HEADER);
  cgi_printf("%s",
     "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\""
     " \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">");
  
  if( g.thTrace ) Th_Trace("BEGIN_HEADER<br />\n", -1);

  /* Generate the header up through the main menu */
  Th_Store("project_name", db_get("project-name","Unnamed Fossil Project"));
  Th_Store("title", zTitle);
  Th_Store("baseurl", g.zBaseURL);

** is used.
**
** The URL specified normally becomes the new "remote-url" used for
** subsequent <a>push</a>, <a>pull</a>, and <a>sync</a> operations.  However,
** the "--once" command-line option makes the URL a one-time-use URL
** that is not saved.
**



** See also: <a>clone</a>, <a>pull</a>, <a>sync</a>, <a>remote-url</a>
*/
void push_cmd(void){
  process_sync_args();
  client_sync(1,0,0,0,0);
}

** command is used.
**
** The URL specified normally becomes the new "remote-url" used for
** subsequent <a>push</a>, <a>pull</a>, and <a>sync</a> operations.  However,
** the "--once" command-line option makes the URL a one-time-use URL
** that is not saved.
**



** See also: <a>clone</a>, <a>push</a>, <a>pull</a>, <a>remote-url</a>
*/
void sync_cmd(void){
  int syncFlags = process_sync_args();
  client_sync(1,1,0,syncFlags,0);
}

/*

** Run various subcommands to control tickets
**
**     %fossil ticket show (REPORTTITLE|REPORTNR) ?TICKETFILTER? ?options?
**
**         options can be:
**           ?-l|--limit LIMITCHAR?
**           ?-q|--quote?
**           ?-R|--repository FILE?
**
**         Run the ticket report, identified by the report format title
**         used in the gui. The data is written as flat file on stdout,
**         using "," as separator. The seperator "," can be changed using
**         the -l or --limit option.
**         If TICKETFILTER is given on the commandline, the query is
**         limited with a new WHERE-condition.

** All this stuff can also be done in the gui:
**  * Go the the <a href="reportlist">Tickets</a> page
*/
void ticket_cmd(void){
  int n;

  /* do some ints, we want to be inside a checkout */

  db_find_and_open_repository(1);
  user_select();
  /*
  ** Check that the user exists.
  */
  if( !db_exists("SELECT 1 FROM user WHERE login=%Q", g.zLogin) ){
    fossil_fatal("no such user: %s", g.zLogin);

** If the VERSION argument is omitted, then the leaf of the subtree
** that begins at the current version is used, if there is only a single
** leaf.  VERSION can also be "current" to select the leaf of the current
** version or "latest" to select the most recent check-in.
**
** If one or more FILES are listed after the VERSION then only the
** named files are candidates to be updated.  If FILES is omitted, all
** files in the current checkout are subject to be updated.  Using
** a directory name for one of the FILES arguments is the same as
** using every subdirectory and file beneath that directory.
**
** The -n or --nochange option causes this command to do a "dry run".  It
** prints out what would have happened but does not actually make any
** changes to the current checkout or the repository.
**
** The -v or --verbose option prints status information about unchanged
** files in addition to those file that actually do change.

      fossil_fatal("Multiple descendants");
    }
    tid = db_int(0, "SELECT rid FROM leaves, event"
                    " WHERE event.objid=leaves.rid"
                    " ORDER BY event.mtime DESC"); 
  }

  if( !verboseFlag && (tid==vid)) return;  /* Nothing to update */
  db_begin_transaction();
  vfile_check_signature(vid, 1);
  if( !nochangeFlag ) undo_begin();
  load_vfile_from_rid(tid);

  /*
  ** The record.fn field is used to match files against each other.  The

      "UPDATE fv SET idv=%d, ridv=%d, chnged=%d WHERE fn=%Q",
      id, rid, chnged, fn
    );
  }
  db_finalize(&q);

  /* If FILES appear on the command-line, remove from the "fv" table
  ** every entry that is not named on the command-line or which is not
  ** in a directory named on the command-line.
  */
  if( g.argc>=4 ){
    Blob sql;              /* SQL statement to purge unwanted entries */

    Blob treename;         /* Normalized filename */
    int i;                 /* Loop counter */
    const char *zSep;      /* Term separator */

    blob_zero(&sql);
    blob_append(&sql, "DELETE FROM fv WHERE ", -1);
    zSep = "";
    for(i=3; i<g.argc; i++){
      file_tree_name(g.argv[i], &treename, 1);
      if( file_isdir(g.argv[i])==1 ){
        if( blob_size(&treename)>0 ){
          blob_appendf(&sql, "%sfn NOT GLOB '%b/*' ", zSep, &treename);
        }else{
          blob_reset(&sql);
          break;
        }
      }else{
        blob_appendf(&sql, "%sfn<>%B ", zSep, &treename);
      }
      zSep = "AND ";
      blob_reset(&treename);
    }

    db_multi_exec(blob_str(&sql));
    blob_reset(&sql);
  }

  db_prepare(&q, 
    "SELECT fn, idv, ridv, idt, ridt, chnged FROM fv ORDER BY 1"
  );

        printf("***** Cannot merge binary file %s\n", zName);
      }
      blob_reset(&v);
      blob_reset(&e);
      blob_reset(&t);
      blob_reset(&r);
    }else if( verboseFlag ){
      if( chnged ){
        printf("EDITED %s\n", zName);
      }else{
        printf("UNCHANGED %s\n", zName);
      }
    }
    free(zFullPath);
  }
  db_finalize(&q);
  
  /*
  ** Clean up the mid and pid VFILE entries.  Then commit the changes.

  char *zIndexPage = db_get("index-page",0);
  login_check_credentials();
  if( !g.okRdWiki ){
    cgi_redirectf("%s/login?g=%s/home", g.zBaseURL, g.zBaseURL);
  }
  if( zIndexPage ){
    const char *zPathInfo = P("PATH_INFO");
    while( zIndexPage[0]=='/' ) zIndexPage++;
    if( strcmp(zIndexPage, zPathInfo)==0 ) zIndexPage = 0;
  }
  if( zIndexPage ){

    cgi_redirectf("%s/%s", g.zBaseURL, zIndexPage);
  }
  if( zPageName ){
    login_check_credentials();
    g.zExtra = zPageName;
    cgi_set_parameter_nocopy("name", g.zExtra);
    g.isHome = 1;

  sprintf(zCmd, "\"%s\" http \"%s\" %s %s %s%s",
    _pgmptr, g.zRepositoryName, zRequestFName, zReplyFName, 
    inet_ntoa(p->addr.sin_addr), p->zNotFound
  );
  if( g.fHttpTrace ){
    fprintf(stderr,"HTTPTRACE(%p): calling '%s'\n",pAppData,zCmd);
  }
  fossil_system(zCmd);
  in = fopen(zReplyFName, "rb");
  if( in ){
    if( g.fHttpTrace ){
      fprintf(stderr,"HTTPTRACE(%p): read reply '%s'\n",pAppData,zReplyFName);
    }
    while( (got = fread(zHdr, 1, sizeof(zHdr), in))>0 ){
      send(p->s, zHdr, got, 0);

    }
  }
  zTempPrefix = mprintf("fossil_server_P%d_", iPort);
  printf("Listening for HTTP requests on TCP port %d\n", iPort);
  if( zBrowser ){
    zBrowser = mprintf(zBrowser, iPort);
    printf("Launch webbrowser: %s\n", zBrowser);
    fossil_system(zBrowser);
  }
  printf("Type Ctrl-C to stop the HTTP server\n");
  for(;;){
    SOCKET client;
    SOCKADDR_IN client_addr;
    HttpRequest *p;
    int len = sizeof(client_addr);

  int nDeltaSent;     /* Number of deltas sent */
  int nFileRcvd;      /* Number of files received */
  int nDeltaRcvd;     /* Number of deltas received */
  int nDanglingFile;  /* Number of dangling deltas received */
  int mxSend;         /* Stop sending "file" with pOut reaches this size */
};


























































































































/*
** The input blob contains a UUID.  Convert it into a record ID.
** Create a phantom record if no prior record exists and
** phantomize is true.
**
** Compare to uuid_to_rid().  This routine takes a blob argument

  Xfer xfer;
  int deltaFlag = 0;
  int isClone = 0;
  int nGimme = 0;
  int size;
  int recvConfig = 0;
  char *zNow;




  if( strcmp(PD("REQUEST_METHOD","POST"),"POST") ){
     fossil_redirect_home();
  }
  memset(&xfer, 0, sizeof(xfer));
  blobarray_zero(xfer.aToken, count(xfer.aToken));
  cgi_set_content_type(g.zContentType);
  blob_zero(&xfer.err);
  xfer.pIn = &g.cgiIn;
  xfer.pOut = cgi_output_blob();
  xfer.mxSend = db_get_int("max-download", 20000000);
  g.xferPanic = 1;

  db_begin_transaction();
  db_multi_exec(
     "CREATE TEMP TABLE onremote(rid INTEGER PRIMARY KEY);"
  );
  manifest_crosslink_begin();
  while( blob_line(xfer.pIn, &xfer.line) ){
    if( blob_buffer(&xfer.line)[0]=='#' ) continue;










    xfer.nToken = blob_tokenize(&xfer.line, xfer.aToken, count(xfer.aToken));

    /*   file UUID SIZE \n CONTENT
    **   file UUID DELTASRC SIZE \n CONTENT
    **
    ** Accept a file from the client.
    */

  Blob recv;              /* Reply we got back from the server */
  Xfer xfer;              /* Transfer data */
  int pctDone;            /* Percentage done with a message */
  int lastPctDone = -1;   /* Last displayed pctDone */
  double rArrivalTime;    /* Time at which a message arrived */
  const char *zSCode = db_get("server-code", "x");
  const char *zPCode = db_get("project-code", 0);




  if( db_get_boolean("dont-push", 0) ) pushFlag = 0;
  if( pushFlag + pullFlag + cloneFlag == 0 
     && configRcvMask==0 && configSendMask==0 ) return;

  transport_stats(0, 0, 1);
  socket_global_init();

            g.clockSkewSeen = 1;
          }
        }
        continue;
      }
      xfer.nToken = blob_tokenize(&xfer.line, xfer.aToken, count(xfer.aToken));
      nCardRcvd++;
      if( !g.cgiOutput && !g.fQuiet && recv.nUsed>0 ){
        pctDone = (recv.iCursor*100)/recv.nUsed;
        if( pctDone!=lastPctDone ){
          printf("\rprocessed: %d%%         ", pctDone);
          lastPctDone = pctDone;
          fflush(stdout);
        }
      }

    /* If this is a clone, the go at least two rounds */
    if( cloneFlag && nCycle==1 ) go = 1;

    /* Stop the cycle if the server sends a "clone_seqno 0" card */
    if( cloneSeqno<=0 ) go = 0;   
  };











  transport_stats(&nSent, &nRcvd, 1);
  fossil_print("Total network traffic: %d bytes sent, %d bytes received\n",
               nSent, nRcvd);
  transport_close();
  transport_global_shutdown();
  db_multi_exec("DROP TABLE onremote");
  manifest_crosslink_end();
  content_enable_dephantomize(1);
  db_end_transaction(0);
}

# some random changes in "./t2".  Then call test-delta on the
# two files to make sure that deltas between these two files
# work properly.
#
set filelist [glob $testdir/*]
foreach f $filelist {
  set base [file root [file tail $f]]
protOut "base=$base f=$f"
  set f1 [read_file $f]
  write_file t1 $f1
  for {set i 0} {$i<100} {incr i} {
    write_file t2 [random_changes $f1 1 1 0 0.1]
    fossil test-delta t1 t2
    test delta-$base-$i-1 {$RESULT=="ok"}
    write_file t2 [random_changes $f1 1 1 0 0.2]

  111 - This is line one OF the demo program - 1111
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
write_file_indented t23 {
  <<<<<<< BEGIN MERGE CONFLICT
  111 - This is line ONE of the demo program - 1111
  ============================
  111 - This is line one OF the demo program - 1111
  >>>>>>> END MERGE CONFLICT
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
write_file_indented t32 {
  <<<<<<< BEGIN MERGE CONFLICT
  111 - This is line one OF the demo program - 1111
  ============================
  111 - This is line ONE of the demo program - 1111
  >>>>>>> END MERGE CONFLICT
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
fossil test-3 t1 t3 t2 a32
test merge1-2.1 {[same_file t32 a32]}

write_file_indented t3 {
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
write_file_indented t32 {
  <<<<<<< BEGIN MERGE CONFLICT
  ============================
  000 - Zero lines added to the beginning of - 0000
  111 - This is line one of the demo program - 1111
  >>>>>>> END MERGE CONFLICT
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
write_file_indented t23 {
  <<<<<<< BEGIN MERGE CONFLICT
  000 - Zero lines added to the beginning of - 0000
  111 - This is line one of the demo program - 1111
  ============================
  >>>>>>> END MERGE CONFLICT
  222 - The second line program line in code - 2222
  333 - This is a test of the merging algohm - 3333
  444 - If all goes well, we will be pleased - 4444
  555 - we think it well and other stuff too - 5555
}
fossil test-3 t1 t3 t2 a32
test merge1-4.1 {[same_file t32 a32]}

  KLMN
  OPQR
  STUV
  XYZ.
}
write_file_indented t23 {
  abcd
  <<<<<<< BEGIN MERGE CONFLICT
  efgh 2
  ijkl 2
  mnop 2
  qrst
  uvwx
  yzAB 2
  CDEF 2
  GHIJ 2
  ============================
  efgh
  ijkl
  mnop 3
  qrst 3
  uvwx 3
  yzAB 3
  CDEF
  GHIJ
  >>>>>>> END MERGE CONFLICT
  KLMN
  OPQR
  STUV
  XYZ.
}
fossil test-3 t1 t2 t3 a23
test merge1-7.1 {[same_file t23 a23]}

  STUV
  XYZ.
}
write_file_indented t23 {
  abcd
  efgh 2
  ijkl 2
  <<<<<<< BEGIN MERGE CONFLICT
  mnop
  qrst
  uvwx
  yzAB 2
  CDEF 2
  GHIJ 2
  ============================
  mnop 3
  qrst 3
  uvwx 3
  yzAB 3
  CDEF
  GHIJ
  >>>>>>> END MERGE CONFLICT
  KLMN
  OPQR
  STUV
  XYZ.
}
fossil test-3 t1 t2 t3 a23
test merge1-7.2 {[same_file t23 a23]}

proc merge-test {testid basis v1 v2 result} {
  write_file t1 [join [string trim $basis] \n]\n
  write_file t2 [join [string trim $v1] \n]\n
  write_file t3 [join [string trim $v2] \n]\n
  fossil test-3-way-merge t1 t2 t3 t4
  set x [read_file t4]
  regsub -all {<<<<<<< BEGIN MERGE CONFLICT} $x {>} x
  regsub -all {============================} $x {=} x
  regsub -all {>>>>>>> END MERGE CONFLICT} $x {<} x
  set x [split [string trim $x] \n]
  set result [string trim $result]
  if {$x!=$result} {
    protOut "  Expected \[$result\]"
    protOut "       Got \[$x\]"
    test merge3-$testid 0
  } else {
    test merge3-$testid 1
  }
}

merge-test 1 {

proc merge-test {testid basis v1 v2 result1 result2} {
  write_file t1 [join [string trim $basis] \n]\n
  write_file t2 [join [string trim $v1] \n]\n
  write_file t3 [join [string trim $v2] \n]\n
  fossil test-3-way-merge t1 t2 t3 t4
  fossil test-3-way-merge t1 t3 t2 t5
  set x [read_file t4]
  regsub -all {<<<<<<< BEGIN MERGE CONFLICT} $x {>} x
  regsub -all {============================} $x {=} x
  regsub -all {>>>>>>> END MERGE CONFLICT} $x {<} x
  set x [split [string trim $x] \n]
  set y [read_file t5]
  regsub -all {<<<<<<< BEGIN MERGE CONFLICT} $y {>} y
  regsub -all {============================} $y {=} y
  regsub -all {>>>>>>> END MERGE CONFLICT} $y {<} y
  set y [split [string trim $y] \n]
  set result1 [string trim $result1]
  if {$x!=$result1} {
    protOut "  Expected \[$result1\]"
    protOut "       Got \[$x\]"
    test merge3-$testid 0
  } else {
    set result2 [string trim $result2]
    if {$y!=$result2} {
      protOut "  Expected \[$result2\]"
      protOut "       Got \[$y\]"
      test merge3-$testid 0
    } else {
      test merge3-$testid 1
    }
  }
}

set i [lsearch $argv -halt]
if {$i>=0} {
  set HALT 1
  set argv [lreplace $argv $i $i]
} else {
  set HALT 0
}

set i [lsearch $argv -prot]
if {$i>=0} {
  set PROT 1
  set argv [lreplace $argv $i $i]
} else {
  set PROT 0
}

if {[llength $argv]==0} {
  foreach f [lsort [glob $testdir/*.test]] {
    set base [file root [file tail $f]]
    lappend argv $base
  }
}

# start protocol
#
proc protInit {cmd} {
  if {$::PROT} {
    set out [open "prot" w]
    fconfigure $out -translation platform
    puts $out "starting tests with:$cmd"
    close $out
  }
}

# write protocol
#
proc protOut {msg} {
  puts "$msg"
  if {$::PROT} {
    set out [open "prot" a]
    fconfigure $out -translation platform
    puts $out "$msg"
    close $out
  }
}

# Run the fossil program
#
proc fossil {args} {
  global fossilexe
  set cmd $fossilexe
  foreach a $args {
    lappend cmd $a
  }
  protOut $cmd

  flush stdout
  set rc [catch {eval exec $cmd} result]
  global RESULT CODE
  set CODE $rc
  set RESULT $result
}

# Perform a test
#
proc test {name expr} {
  global bad_test
  set r [uplevel 1 [list expr $expr]]
  if {$r} {
    protOut "test $name OK"
  } else {
    protOut "test $name FAILED!"
    lappend bad_test $name
    if {$::HALT} exit
  }
}
set bad_test {}

# Return a random string N characters long.

      }
    }
    append out \n$line
  }
  return [string range $out 1 end]
}

protInit $fossilexe
foreach testfile $argv {
  protOut "***** $testfile ******"
  source $testdir/$testfile.test
}
protOut "[llength $bad_test] errors: $bad_test"

# define the special utilities files, needed to generate
# the automatically generated source files
UTILS=translate.exe mkindex.exe makeheaders.exe
UTILS_OBJ=$(UTILS:.exe=.obj)
UTILS_SRC=$(foreach uf,$(UTILS),$(SRCDIR)$(uf:.exe=.c))

# define the sqlite files, which need special flags on compile
SQLITESRC1=sqlite3.c
SQLITESRC2=shell.c
ORIGSQLITESRC=$(foreach sf,$(SQLITESRC1) $(SQLITESRC2),$(SRCDIR)$(sf))
SQLITEOBJ1=$(foreach sf,$(SQLITESRC1),$(sf:.c=.obj))
SQLITEOBJ2=$(foreach sf,$(SQLITESRC2),$(sf:.c=.obj))
SQLITEOBJ=$(foreach sf,$(SQLITESRC1) $(SQLITESRC2),$(sf:.c=.obj))
SQLITEDEFINES1=-DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0
SQLITEDEFINES2=-Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1

# define the th scripting files, which need special flags on compile
THSRC=th.c th_lang.c
ORIGTHSRC=$(foreach sf,$(THSRC),$(SRCDIR)$(sf))
THOBJ=$(foreach sf,$(THSRC),$(sf:.c=.obj))

# define the zlib files, needed by this compile

# ###########################################################################
# compile C sources with relevant options

$(TRANSLATEDOBJ):	%_.obj:	%_.c %.h
	$(CC) $(CCFLAGS) $(INCLUDE) "$<" -Fo"$@"

$(SQLITEOBJ1):	%.obj:	$(SRCDIR)%.c $(SRCDIR)%.h
	$(CC) $(CCFLAGS) $(SQLITEDEFINES1) $(INCLUDE) "$<" -Fo"$@"

$(SQLITEOBJ2):	%.obj:	$(SRCDIR)%.c
	$(CC) $(CCFLAGS) $(SQLITEDEFINES2) $(INCLUDE) "$<" -Fo"$@"

$(THOBJ):	%.obj:	$(SRCDIR)%.c $(SRCDIR)th.h
	$(CC) $(CCFLAGS) $(INCLUDE) "$<" -Fo"$@"

$(ZLIBOBJ):	%.obj:	$(ZLIBSRCDIR)%.c
	$(CC) $(CCFLAGS) $(INCLUDE) "$<" -Fo"$@"

CFLAGS = -o 
BCC    = $(DMDIR)\bin\dmc $(CFLAGS)
TCC    = $(DMDIR)\bin\dmc $(CFLAGS) $(DMCDEF) $(I18N) $(SSL) $(INCL)
LIBS   = $(DMDIR)\extra\lib\ zlib wsock32

SRC   = add_.c allrepo_.c attach_.c bag_.c blob_.c branch_.c browse_.c captcha_.c cgi_.c checkin_.c checkout_.c clearsign_.c clone_.c comformat_.c configure_.c content_.c db_.c delta_.c deltacmd_.c descendants_.c diff_.c diffcmd_.c doc_.c encode_.c event_.c file_.c finfo_.c graph_.c http_.c http_socket_.c http_ssl_.c http_transport_.c info_.c login_.c main_.c manifest_.c md5_.c merge_.c merge3_.c name_.c pivot_.c popen_.c pqueue_.c printf_.c rebuild_.c report_.c rss_.c schema_.c search_.c setup_.c sha1_.c shun_.c skins_.c stat_.c style_.c sync_.c tag_.c th_main_.c timeline_.c tkt_.c tktsetup_.c undo_.c update_.c url_.c user_.c verify_.c vfile_.c wiki_.c wikiformat_.c winhttp_.c xfer_.c zip_.c 

OBJ   = $(OBJDIR)\add$O $(OBJDIR)\allrepo$O $(OBJDIR)\attach$O $(OBJDIR)\bag$O $(OBJDIR)\blob$O $(OBJDIR)\branch$O $(OBJDIR)\browse$O $(OBJDIR)\captcha$O $(OBJDIR)\cgi$O $(OBJDIR)\checkin$O $(OBJDIR)\checkout$O $(OBJDIR)\clearsign$O $(OBJDIR)\clone$O $(OBJDIR)\comformat$O $(OBJDIR)\configure$O $(OBJDIR)\content$O $(OBJDIR)\db$O $(OBJDIR)\delta$O $(OBJDIR)\deltacmd$O $(OBJDIR)\descendants$O $(OBJDIR)\diff$O $(OBJDIR)\diffcmd$O $(OBJDIR)\doc$O $(OBJDIR)\encode$O $(OBJDIR)\event$O $(OBJDIR)\file$O $(OBJDIR)\finfo$O $(OBJDIR)\graph$O $(OBJDIR)\http$O $(OBJDIR)\http_socket$O $(OBJDIR)\http_ssl$O $(OBJDIR)\http_transport$O $(OBJDIR)\info$O $(OBJDIR)\login$O $(OBJDIR)\main$O $(OBJDIR)\manifest$O $(OBJDIR)\md5$O $(OBJDIR)\merge$O $(OBJDIR)\merge3$O $(OBJDIR)\name$O $(OBJDIR)\pivot$O $(OBJDIR)\popen$O $(OBJDIR)\pqueue$O $(OBJDIR)\printf$O $(OBJDIR)\rebuild$O $(OBJDIR)\report$O $(OBJDIR)\rss$O $(OBJDIR)\schema$O $(OBJDIR)\search$O $(OBJDIR)\setup$O $(OBJDIR)\sha1$O $(OBJDIR)\shun$O $(OBJDIR)\skins$O $(OBJDIR)\stat$O $(OBJDIR)\style$O $(OBJDIR)\sync$O $(OBJDIR)\tag$O $(OBJDIR)\th_main$O $(OBJDIR)\timeline$O $(OBJDIR)\tkt$O $(OBJDIR)\tktsetup$O $(OBJDIR)\undo$O $(OBJDIR)\update$O $(OBJDIR)\url$O $(OBJDIR)\user$O $(OBJDIR)\verify$O $(OBJDIR)\vfile$O $(OBJDIR)\wiki$O $(OBJDIR)\wikiformat$O $(OBJDIR)\winhttp$O $(OBJDIR)\xfer$O $(OBJDIR)\zip$O $(OBJDIR)\shell$O $(OBJDIR)\sqlite3$O $(OBJDIR)\th$O $(OBJDIR)\th_lang$O 

RC=$(DMDIR)\bin\rcc
RCFLAGS=-32 -w1 -I$(SRCDIR) /D__DMC__

APPNAME = $(OBJDIR)\fossil$(E)

all: $(APPNAME)

$(APPNAME) : translate$E mkindex$E headers fossil.res $(OBJ) $(OBJDIR)\link
	cd $(OBJDIR) 
	$(DMDIR)\bin\link @link

fossil.res:	$B\win\fossil.rc VERSION.h
	$(RC) $(RCFLAGS) -o$@ $B\win\fossil.rc

$(OBJDIR)\link: $B\win\Makefile.dmc
	+echo add allrepo attach bag blob branch browse captcha cgi checkin checkout clearsign clone comformat configure content db delta deltacmd descendants diff diffcmd doc encode event file finfo graph http http_socket http_ssl http_transport info login main manifest md5 merge merge3 name pivot popen pqueue printf rebuild report rss schema search setup sha1 shun skins stat style sync tag th_main timeline tkt tktsetup undo update url user verify vfile wiki wikiformat winhttp xfer zip shell sqlite3 th th_lang > $@
	+echo fossil >> $@
	+echo fossil >> $@
	+echo $(LIBS) >> $@
	+echo. >> $@
	+echo fossil >> $@



translate$E: $(SRCDIR)\translate.c
	$(BCC) -o$@ $**

makeheaders$E: $(SRCDIR)\makeheaders.c
	$(BCC) -o$@ $**

mkindex$E: $(SRCDIR)\mkindex.c
	$(BCC) -o$@ $**

version$E: $B\win\version.c
	$(BCC) -o$@ $**

$(OBJDIR)\shell$O : $(SRCDIR)\shell.c
	$(TCC) -o$@ -c -Dmain=sqlite3_shell -DSQLITE_OMIT_LOAD_EXTENSION=1 $**

$(OBJDIR)\sqlite3$O : $(SRCDIR)\sqlite3.c
	$(TCC) -o$@ -c -DSQLITE_OMIT_LOAD_EXTENSION=1 -DSQLITE_THREADSAFE=0 -DSQLITE_DEFAULT_FILE_FORMAT=4 -Dlocaltime=fossil_localtime -DSQLITE_ENABLE_LOCKING_STYLE=0 $**

$(OBJDIR)\th$O : $(SRCDIR)\th.c
	$(TCC) -o$@ -c $**

$(OBJDIR)\th_lang$O : $(SRCDIR)\th_lang.c

clean:
	-del $(OBJDIR)\*.obj
	-del *.obj *_.c *.h *.map

realclean:
	-del $(APPNAME) translate$E mkindex$E makeheaders$E version$E
	-del fossil.res headers link


$(OBJDIR)\add$O : add_.c add.h
	$(TCC) -o$@ -c add_.c

add_.c : $(SRCDIR)\add.c
	+translate$E $** > $@

$(OBJDIR)\doc$O : doc_.c doc.h
	$(TCC) -o$@ -c doc_.c

doc_.c : $(SRCDIR)\doc.c
	+translate$E $** > $@







$(OBJDIR)\encode$O : encode_.c encode.h
	$(TCC) -o$@ -c encode_.c

encode_.c : $(SRCDIR)\encode.c
	+translate$E $** > $@

$(OBJDIR)\event$O : event_.c event.h

$(OBJDIR)\zip$O : zip_.c zip.h
	$(TCC) -o$@ -c zip_.c

zip_.c : $(SRCDIR)\zip.c
	+translate$E $** > $@

headers: makeheaders$E page_index.h VERSION.h
	+makeheaders$E add_.c:add.h allrepo_.c:allrepo.h attach_.c:attach.h bag_.c:bag.h blob_.c:blob.h branch_.c:branch.h browse_.c:browse.h captcha_.c:captcha.h cgi_.c:cgi.h checkin_.c:checkin.h checkout_.c:checkout.h clearsign_.c:clearsign.h clone_.c:clone.h comformat_.c:comformat.h configure_.c:configure.h content_.c:content.h db_.c:db.h delta_.c:delta.h deltacmd_.c:deltacmd.h descendants_.c:descendants.h diff_.c:diff.h diffcmd_.c:diffcmd.h doc_.c:doc.h encode_.c:encode.h event_.c:event.h file_.c:file.h finfo_.c:finfo.h graph_.c:graph.h http_.c:http.h http_socket_.c:http_socket.h http_ssl_.c:http_ssl.h http_transport_.c:http_transport.h info_.c:info.h login_.c:login.h main_.c:main.h manifest_.c:manifest.h md5_.c:md5.h merge_.c:merge.h merge3_.c:merge3.h name_.c:name.h pivot_.c:pivot.h popen_.c:popen.h pqueue_.c:pqueue.h printf_.c:printf.h rebuild_.c:rebuild.h report_.c:report.h rss_.c:rss.h schema_.c:schema.h search_.c:search.h setup_.c:setup.h sha1_.c:sha1.h shun_.c:shun.h skins_.c:skins.h stat_.c:stat.h style_.c:style.h sync_.c:sync.h tag_.c:tag.h th_main_.c:th_main.h timeline_.c:timeline.h tkt_.c:tkt.h tktsetup_.c:tktsetup.h undo_.c:undo.h update_.c:update.h url_.c:url.h user_.c:user.h verify_.c:verify.h vfile_.c:vfile.h wiki_.c:wiki.h wikiformat_.c:wikiformat.h winhttp_.c:winhttp.h xfer_.c:xfer.h zip_.c:zip.h $(SRCDIR)\sqlite3.h $(SRCDIR)\th.h VERSION.h
	@copy /Y nul: headers

A delta-manifest records only changes from its baseline.  

A manifest must have exactly one C-card.  The sole argument to
the C-card is a check-in comment that describes the check-in that
the manifest defines.  The check-in comment is text.  The following
escape sequences are applied to the text:
A space (ASCII 0x20) is represented as "\s" (ASCII 0x5C, 0x73).  A
newline (ASCII 0x0a) is "\n" (ASCII 0x5C, x6E).  A backslash 
(ASCII 0x5C) is represented as two backslashes "\\".  Apart from
space and newline, no other whitespace characters are allowed in
the check-in comment.  Nor are any unprintable characters allowed
in the comment.

A manifest must have exactly one D-card.  The sole argument to
the D-card is a date-time stamp in the ISO8601 format.  The