# Visual C++ 2.x and 4.0 makefile
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
# 
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
#
# RCS: @(#) $Id: makefile.vc,v 1.56 2000/10/31 01:20:09 davidg Exp $

# Does not depend on the presence of any environment variables in
# order to compile tcl; all needed information is derived from 
# location of the compiler directories.

#
# Project directories
#
# ROOT	  = top of source tree
#
# TOOLS32 = location of VC++ 32-bit development tools. Note that the
#	    VC++ 2.0 header files are broken, so you need to use the
#	    ones that come with the developer network CD's, or later
#	    versions of VC++.
#
# INSTALLDIR = where the install- targets should copy the binaries and
#	    support files
#

# Set this to the appropriate value of /MACHINE: for your platform
MACHINE		= IX86
#MACHINE		= ALPHA

ROOT		= ..
INSTALLDIR	= c:\Progra~1\Tcl

!IF "$(MACHINE)" == "IA64"
TOOLS32		= c:\ia64sdk17
TOOLS32_rc	= c:\ia64sdk17
!ELSE IF "$(MACHINE)" == "ALPHA"
TOOLS32		= C:\Progra~1\Micros~2\vc98
TOOLS32_rc	= C:\Progra~1\Micros~2\common\MSDev98
!ELSE
TOOLS32		= c:\Progra~1\devstudio\vc
TOOLS32_rc	= c:\Progra~1\devstudio\sharedide
!ENDIF

# Uncomment the following line to compile with thread support
#THREADDEFINES = -DTCL_THREADS=1

# Set NODEBUG to 0 to compile with symbols
NODEBUG = 1

# The following defines can be used to control the amount of debugging
# code that is added to the compilation.
#
#	-DTCL_MEM_DEBUG		Enables the debugging memory allocator.
#	-DTCL_COMPILE_DEBUG	Enables byte compilation logging.
#	-DTCL_COMPILE_STATS	Enables byte compilation statistics gathering.
#	-DUSE_TCLALLOC=0	Disables the Tcl memory allocator in favor
#				of the native malloc implementation.  This is
#				needed when using Purify.
#
#DEBUGDEFINES = -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
#DEBUGDEFINES = -DUSE_TCLALLOC=0

######################################################################
# Do not modify below this line
######################################################################

NAMEPREFIX = tcl
STUBPREFIX = $(NAMEPREFIX)stub
DOTVERSION = 8.4
VERSION = 84

BINROOT		= .
!IF "$(NODEBUG)" == "1"
TMPDIRNAME	= Release
DBGX		=
!ELSE
TMPDIRNAME	= Debug
DBGX		= d
!ENDIF
TMPDIR		= $(BINROOT)\$(TMPDIRNAME)
OUTDIRNAME	= $(TMPDIRNAME)
OUTDIR		= $(TMPDIR)

TCLLIB		= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
TCLDLLNAME	= $(NAMEPREFIX)$(VERSION)$(DBGX).dll
TCLDLL		= $(OUTDIR)\$(TCLDLLNAME)

TCLSTUBLIBNAME	= $(STUBPREFIX)$(VERSION)$(DBGX).lib
TCLSTUBLIB	= $(OUTDIR)\$(TCLSTUBLIBNAME)

TCLPLUGINLIB	= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
TCLPLUGINDLLNAME= $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
TCLPLUGINDLL	= $(OUTDIR)\$(TCLPLUGINDLLNAME)
TCLSH		= $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
TCLSHP		= $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
TCLPIPEDLLNAME	= $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
TCLPIPEDLL	= $(OUTDIR)\$(TCLPIPEDLLNAME)
TCLREGDLLNAME	= $(NAMEPREFIX)reg$(VERSION)$(DBGX).dll
TCLREGDLL	= $(OUTDIR)\$(TCLREGDLLNAME)
TCLDDEDLLNAME	= $(NAMEPREFIX)dde$(VERSION)$(DBGX).dll
TCLDDEDLL	= $(OUTDIR)\$(TCLDDEDLLNAME)
TCLTEST		= $(OUTDIR)\$(NAMEPREFIX)test.exe
CAT32		= $(TMPDIR)\cat32.exe
RMDIR		= .\rmd.bat
MKDIR		= .\mkd.bat
RM		= del

LIB_INSTALL_DIR	= $(INSTALLDIR)\lib
BIN_INSTALL_DIR	= $(INSTALLDIR)\bin
SCRIPT_INSTALL_DIR	= $(INSTALLDIR)\lib\tcl$(DOTVERSION)
INCLUDE_INSTALL_DIR	= $(INSTALLDIR)\include

TCLSHOBJS = \
	$(TMPDIR)\tclAppInit.obj

TCLTESTOBJS = \
	$(TMPDIR)\tclTest.obj \
	$(TMPDIR)\tclTestObj.obj \
	$(TMPDIR)\tclTestProcBodyObj.obj \
	$(TMPDIR)\tclThreadTest.obj \
	$(TMPDIR)\tclWinTest.obj \
	$(TMPDIR)\testMain.obj

TCLOBJS = \
	$(TMPDIR)\regcomp.obj \
	$(TMPDIR)\regexec.obj \
	$(TMPDIR)\regfree.obj \
	$(TMPDIR)\regerror.obj \
	$(TMPDIR)\strftime.obj \
	$(TMPDIR)\tclAlloc.obj \
	$(TMPDIR)\tclAsync.obj \
	$(TMPDIR)\tclBasic.obj \
	$(TMPDIR)\tclBinary.obj \
	$(TMPDIR)\tclCkalloc.obj \
	$(TMPDIR)\tclClock.obj \
	$(TMPDIR)\tclCmdAH.obj \
	$(TMPDIR)\tclCmdIL.obj \
	$(TMPDIR)\tclCmdMZ.obj \
	$(TMPDIR)\tclCompCmds.obj \
	$(TMPDIR)\tclCompExpr.obj \
	$(TMPDIR)\tclCompile.obj \
	$(TMPDIR)\tclDate.obj \
	$(TMPDIR)\tclEncoding.obj \
	$(TMPDIR)\tclEnv.obj \
	$(TMPDIR)\tclEvent.obj \
	$(TMPDIR)\tclExecute.obj \
	$(TMPDIR)\tclFCmd.obj \
	$(TMPDIR)\tclFileName.obj \
	$(TMPDIR)\tclGet.obj \
	$(TMPDIR)\tclHash.obj \
	$(TMPDIR)\tclHistory.obj \
	$(TMPDIR)\tclIndexObj.obj \
	$(TMPDIR)\tclInterp.obj \
	$(TMPDIR)\tclIO.obj \
	$(TMPDIR)\tclIOCmd.obj \
	$(TMPDIR)\tclIOGT.obj \
	$(TMPDIR)\tclIOSock.obj \
	$(TMPDIR)\tclIOUtil.obj \
	$(TMPDIR)\tclLink.obj \
	$(TMPDIR)\tclLiteral.obj \
	$(TMPDIR)\tclListObj.obj \
	$(TMPDIR)\tclLoad.obj \
	$(TMPDIR)\tclMain.obj \
	$(TMPDIR)\tclNamesp.obj \
	$(TMPDIR)\tclNotify.obj \
	$(TMPDIR)\tclObj.obj \
	$(TMPDIR)\tclPanic.obj \
	$(TMPDIR)\tclParse.obj \
	$(TMPDIR)\tclParseExpr.obj \
	$(TMPDIR)\tclPipe.obj \
	$(TMPDIR)\tclPkg.obj \
	$(TMPDIR)\tclPosixStr.obj \
	$(TMPDIR)\tclPreserve.obj \
	$(TMPDIR)\tclProc.obj \
	$(TMPDIR)\tclRegexp.obj \
	$(TMPDIR)\tclResolve.obj \
	$(TMPDIR)\tclResult.obj \
	$(TMPDIR)\tclScan.obj \
	$(TMPDIR)\tclStringObj.obj \
	$(TMPDIR)\tclStubInit.obj \
	$(TMPDIR)\tclStubLib.obj \
	$(TMPDIR)\tclThread.obj \
	$(TMPDIR)\tclThreadJoin.obj \
	$(TMPDIR)\tclTimer.obj \
	$(TMPDIR)\tclUtf.obj \
	$(TMPDIR)\tclUtil.obj \
	$(TMPDIR)\tclVar.obj \
	$(TMPDIR)\tclWin32Dll.obj \
	$(TMPDIR)\tclWinChan.obj \
	$(TMPDIR)\tclWinConsole.obj \
	$(TMPDIR)\tclWinSerial.obj \
	$(TMPDIR)\tclWinError.obj \
	$(TMPDIR)\tclWinFCmd.obj \
	$(TMPDIR)\tclWinFile.obj \
	$(TMPDIR)\tclWinInit.obj \
	$(TMPDIR)\tclWinLoad.obj \
	$(TMPDIR)\tclWinMtherr.obj \
	$(TMPDIR)\tclWinNotify.obj \
	$(TMPDIR)\tclWinPipe.obj \
	$(TMPDIR)\tclWinSock.obj \
	$(TMPDIR)\tclWinThrd.obj \
	$(TMPDIR)\tclWinTime.obj 

TCLSTUBOBJS = $(TMPDIR)\tclStubLib.obj \

cc32		= "$(TOOLS32)\bin\cl.exe"
link32		= "$(TOOLS32)\bin\link.exe"
rc32		= "$(TOOLS32_rc)\bin\rc.exe"
include32	= -I"$(TOOLS32)\include"
libpath32	= /LIBPATH:"$(TOOLS32)\lib"
lib32		= "$(TOOLS32)\bin\lib.exe"

WINDIR		= $(ROOT)\win
GENERICDIR	= $(ROOT)\generic

TCL_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)"
TCL_DEFINES	= $(DEBUGDEFINES) $(THREADDEFINES)

######################################################################
# Compile flags
######################################################################

!IF "$(NODEBUG)" == "1"
# This cranks the optimization level to maximize speed
cdebug = -O2 -Gs -GD
!ELSE
!IF "$(MACHINE)" == "IA64"
cdebug = -Od -Zi
!ELSE
cdebug = -Z7 -Od -WX
!ENDIF
!ENDIF

# declarations common to all compiler options
cflags = -c -W3 -nologo -Fp$(TMPDIR)\ -YX
cvarsdll = -MD$(DBGX)

TCL_CFLAGS	= $(cdebug) $(cflags) $(cvarsdll) $(include32) \
			$(TCL_INCLUDES) $(TCL_DEFINES)
CON_CFLAGS	= $(cdebug) $(cflags) $(include32) -DCONSOLE

######################################################################
# Link flags
######################################################################

!IF "$(NODEBUG)" == "1"
ldebug	= /RELEASE
!ELSE
ldebug	= -debug:full -debugtype:cv
!ENDIF

# declarations common to all linker options
lflags	= /NODEFAULTLIB /NOLOGO /MACHINE:$(MACHINE) $(libpath32)

# declarations for use on Intel i386, i486, and Pentium systems
!IF "$(MACHINE)" == "IX86"
DLLENTRY = @12
dlllflags = $(lflags) -entry:_DllMainCRTStartup$(DLLENTRY) -dll
!ELSE
!IF "$(MACHINE)" == "IA64"
DLLENTRY = @12
dlllflags = $(lflags) -dll
!ELSE
dlllflags = $(lflags) -entry:_DllMainCRTStartup$(DLLENTRY) -dll
!ENDIF
!ENDIF

conlflags = $(lflags) -subsystem:console -entry:mainCRTStartup
guilflags = $(lflags) -subsystem:windows -entry:WinMainCRTStartup

!IF "$(MACHINE)" == "PPC"
libc = libc$(DBGX).lib
libcdll = crtdll$(DBGX).lib
!ELSE
libc = libc$(DBGX).lib oldnames.lib
libcdll = msvcrt$(DBGX).lib oldnames.lib
!ENDIF

baselibs   = kernel32.lib $(optlibs) advapi32.lib user32.lib
winlibs	   = $(baselibs) gdi32.lib comdlg32.lib winspool.lib

guilibs	   = $(libc) $(winlibs)
conlibs	   = $(libc) $(baselibs)
guilibsdll = $(libcdll) $(winlibs)
conlibsdll = $(libcdll) $(baselibs)

######################################################################
# Project specific targets
######################################################################

release:    setup $(TCLSH) dlls
dlls:	    setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
all:	    setup $(TCLSH) dlls $(CAT32) 
tcltest:    setup $(TCLTEST) dlls $(CAT32)
plugin:	    setup $(TCLPLUGINDLL) $(TCLSHP)
install:    install-binaries install-libraries
test:	    setup $(TCLTEST) dlls $(CAT32)
	set TCL_LIBRARY=$(ROOT)/library
	$(TCLTEST) $(ROOT)/tests/all.tcl

setup:
	@$(MKDIR) $(TMPDIR)
	@$(MKDIR) $(OUTDIR)

$(TCLLIB): $(TCLDLL)

$(TCLDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
	$(link32) $(ldebug) $(dlllflags) \
		-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @<<
$(TCLOBJS)
<<

$(TCLSTUBLIB): $(TCLSTUBOBJS)
	$(lib32) /out:$@ $(TCLSTUBOBJS)

$(TCLPLUGINLIB): $(TCLPLUGINDLL)

$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
	$(link32) $(ldebug) $(dlllflags) \
		-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @<<
$(TCLOBJS)
<<

$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\tclsh.res
	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
		-out:$@ $(conlibsdll) $(TCLLIB) $(TCLSHOBJS) 

$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
		-out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS) 

$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\tclsh.res
	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
		 -out:$@ $(conlibsdll) $(TCLLIB) $(TCLTESTOBJS)

$(TCLPIPEDLL): $(WINDIR)\stub16.c
	$(cc32) $(CON_CFLAGS) -Fo$(TMPDIR)\ $(WINDIR)\stub16.c
	$(link32) $(ldebug) $(conlflags) -out:$@ $(TMPDIR)\stub16.obj $(guilibs)

$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
	$(link32) $(ldebug) $(dlllflags) -out:$@ $(TMPDIR)\tclWinDde.obj \
		$(conlibsdll) $(TCLSTUBLIB)

$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
	$(link32) $(ldebug) $(dlllflags) -out:$@ $(TMPDIR)\tclWinReg.obj \
		$(conlibsdll) $(TCLSTUBLIB)

$(CAT32): $(WINDIR)\cat.c
	$(cc32) $(CON_CFLAGS) -Fo$(TMPDIR)\ $?
	$(link32) $(conlflags) -out:$@ -stack:16384 $(TMPDIR)\cat.obj $(conlibs)

install-binaries: $(TCLSH)
	$(MKDIR) "$(BIN_INSTALL_DIR)"
	$(MKDIR) "$(LIB_INSTALL_DIR)"
	@echo installing $(TCLDLLNAME)
	@copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
	@copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
	@echo installing "$(TCLSH)"
	@copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
	@echo installing $(TCLPIPEDLLNAME)
	@copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
	@echo installing $(TCLSTUBLIBNAME)
	@copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"

install-libraries:
	-@$(MKDIR) "$(LIB_INSTALL_DIR)"
	-@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
	@echo installing http1.0
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
	-@copy "$(ROOT)\library\http1.0\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http1.0"
	-@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
	@echo installing http2.3
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.3"
	-@copy "$(ROOT)\library\http2.3\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http2.3"
	-@copy "$(ROOT)\library\http2.3\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.3"
	@echo installing opt0.4
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
	-@copy "$(ROOT)\library\opt0.4\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
	-@copy "$(ROOT)\library\opt0.4\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
	@echo installing msgcat1.0
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.0"
	-@copy "$(ROOT)\library\msgcat1.0\msgcat.tcl"   "$(SCRIPT_INSTALL_DIR)\msgcat1.0"
	-@copy "$(ROOT)\library\msgcat1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.0"
	@echo installing $(TCLDDEDLLNAME)
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.1"
	-@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.1"
	-@copy "$(ROOT)\library\dde1.1\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.1"
	@echo installing $(TCLREGDLLNAME)
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.0"
	-@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.0"
	-@copy "$(ROOT)\library\reg1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.0"
	@echo installing encoding files
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
	-@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
	@echo installing library files
	-@copy "$(GENERICDIR)\tcl.h"          "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(GENERICDIR)\tclDecls.h"     "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(ROOT)\library\history.tcl"  "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\init.tcl"     "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\ldAout.tcl"   "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\parray.tcl"   "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\safe.tcl"     "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\tclIndex"     "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\package.tcl"  "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\word.tcl"     "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\auto.tcl"     "$(SCRIPT_INSTALL_DIR)"

#
# Regenerate the stubs files.
#

genstubs:
	tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
		$(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls

#
# Regenerate the windows help files.
#

TCLTOOLS	= $(ROOT)/tools
MAN2TCL		= $(TCLTOOLS)/man2tcl
TCLRTF		= $(TCLTOOLS)/tcl.rtf
TCLHPJ		= $(TCLTOOLS)/tcl.hpj
MAN2HELP	= $(TCLTOOLS)/man2help.tcl
HCRTF		= $(TOOLS32)/bin/hcrtf.exe

winhelp: $(TCLRTF)
	cd $(TCLTOOLS)
	start /wait $(HCRTF) -xn $(TCLHPJ)

$(MAN2TCL).exe: $(MAN2TCL).obj 
	cd $(TCLTOOLS)
	$(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c

$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
	cd $(TCLTOOLS)
	..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc

#
# Special case object file targets
#

$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) $(EXTFLAGS) -Fo$(TMPDIR)\ $?

$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) -DTCL_TEST -Fo$(TMPDIR)\testMain.obj $?

$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

# The following objects should be built using the stub interfaces

$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -Fo$@ $?

$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -Fo$@ $?

# The following objects are part of the stub library and should not
# be built as DLL objects but none of the symbols should be exported

$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
	$(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -Fo$@ $?


# Dedependency rules

$(GENERICDIR)\regcomp.c: \
	$(GENERICDIR)\regguts.h \
	$(GENERICDIR)\regc_lex.c \
	$(GENERICDIR)\regc_color.c \
	$(GENERICDIR)\regc_nfa.c \
	$(GENERICDIR)\regc_cvec.c \
	$(GENERICDIR)\regc_locale.c
$(GENERICDIR)\regcustom.h: \
	$(GENERICDIR)\tclInt.h \
	$(GENERICDIR)\tclPort.h \
	$(GENERICDIR)\regex.h
$(GENERICDIR)\regexec.c: \
	$(GENERICDIR)\rege_dfa.c \
	$(GENERICDIR)\regguts.h
$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h

#
# Implicit rules
#

{$(WINDIR)}.c{$(TMPDIR)}.obj:
    $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -Fo$(TMPDIR)\ $<

{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
    $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -Fo$(TMPDIR)\ $<

{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
    $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -Fo$(TMPDIR)\ $<

{$(WINDIR)}.rc{$(TMPDIR)}.res:
	$(rc32) -fo $@ -r -i $(GENERICDIR) -i $(WINDIR) -D__WIN32__ \
		$(TCL_DEFINES) \
!if "$(NODEBUG)" == "0"
		-d DEBUG \
!endif
		$<

clean:
	-@$(RM) $(OUTDIR)\*.exp 
	-@$(RM) $(OUTDIR)\*.lib 
	-@$(RM) $(OUTDIR)\*.dll 
	-@$(RM) $(OUTDIR)\*.exe
	-@$(RM) $(OUTDIR)\*.pdb
	-@$(RM) $(TMPDIR)\*.pch
	-@$(RM) $(TMPDIR)\*.obj
	-@$(RM) $(TMPDIR)\*.res
	-@$(RM) $(TMPDIR)\*.exe
	-@$(RMDIR) $(OUTDIR)
	-@$(RMDIR) $(TMPDIR)
